Manufacturer since 2009 · Tongling, Anhui ISO certified Licensed for hazardous & precursor chemicals
[email protected] · +86 186 5620 1888
Eapearl Chemical
Propylene glycol monomethyl ether (PM), CAS 107-98-2 — chemical product label

Propylene glycol monomethyl ether (PM)

PM

CAS 107-98-2 EC 203-953-2 C4H10O2 Ether SDS published CLP Warning

⚠️ Note: This safety data sheet is provided in English; a localized version is being prepared.

MolGod_SDSCARD_1
REACH 2020/878
v2 · 08.09.2026

Specification

Product NamePropylene glycol monomethyl ether (PM)
Other NamesPM
CAS No.107-98-2
EINECS No.203-953-2
MFC4H10O2
Molecular weight90.12
Purity99%
AppearanceColorless liquid
Melting point-97 °C
Boiling point120°C
water solubilitysoluble
InChIInChI:1S/C4H10O2/c1-4(5)3-6-2/h4-5H,3H2,1-2H3

Values are typical for the standard grade. Tighter specifications are available — state the target in your inquiry and we confirm against the production batch.

Hazard classification

GHS pictogram GHS02 — Flammable GHS pictogram GHS07 — Irritant / harmful

Warning

Harmonised classification (EU) — ECHA Annex VI (harmonised, ATP 23; 2026-07-07)

  • H226 Flammable liquid and vapour
  • H336 May cause drowsiness or dizziness
Full safety data sheet CLP label (EN)

European Chemicals Agency. "1-methoxy-2-propanol; monopropylene glycol methyl ether, Index No. 603-064-00-3." In Table 3 of Annex VI to Regulation (EC) No 1272/2008 (CLP Regulation), 23rd Adaptation to Technical Progress (harmonised list as of 2026-07-07). Helsinki: European Chemicals Agency, 2026. https://echa.europa.eu/information-on-chemicals/annex-vi-to-clp.

Substance identity verified against the registry entry on 2026-09-02.

Packaging and shipping

Drum225 kg
IBC Drum1127 kg
ISO tank (20ft)24–26 m³
ISO tank (40ft)48–50 m³
Propylene glycol monomethyl ether (PM)
Propylene glycol monomethyl ether (PM)
Propylene glycol monomethyl ether (PM)
Propylene glycol monomethyl ether (PM)

The propylene glycol methyl ether (PM) supplied by our company is an environmentally friendly ether alcohol solvent with excellent performance and wide application scope. It is produced by the reaction of propylene oxide and methanol. It possesses both the solubility of ethers and the chemical reactivity of alcohols. PM has a moderate evaporation rate, excellent solubility, low toxicity, and good biodegradability, making it an ideal alternative to traditional harmful solvents such as benzene and ketones. It is widely used in numerous industrial fields that have comprehensive requirements for drying speed, solubility performance, and environmental safety.

Propylene Glycol Monomethyl Ether (PM) Multi-functional Solution | Suitable for coatings, cleaning, pesticides, electronics and other applications | High cost-effectiveness, strong solubilityPropylene Glycol Monomethyl Ether (PM) Multi-functional Solution | Suitable for coatings, cleaning, pesticides, electronics and other applications | High cost-effectiveness, strong solubilityPropylene Glycol Monomethyl Ether (PM) Multi-functional Solution | Suitable for coatings, cleaning, pesticides, electronics and other applications | High cost-effectiveness, strong solubility

Propylene Glycol Monomethyl Ether (PM) Multi-functional Solution | Suitable for coatings, cleaning, pesticides, electronics and other applications | High cost-effectiveness, strong solubility

Product Description

Anhui Eapearl Chemical Co., Ltd., as a professional supplier specializing in fine chemicals, based in the Yangtze River Delta and serving the entire country, continuously provides the market with high-quality, stable and reliable propylene glycol methyl ether (PM) products. We are committed to becoming the most trusted partner for customers in the selection of environmentally friendly solvents and the optimization of formulations.

The propylene glycol methyl ether (PM) supplied by our company is an environmentally friendly ether alcohol solvent with excellent performance and wide applications. It is produced by the reaction of propylene oxide and methanol, possessing the dissolution ability of ethers and the chemical reaction activity of alcohols. PM has an appropriate evaporation rate, excellent solubility, low toxicity and good biodegradability, making it an ideal alternative to traditional harmful solvents such as benzene and ketones. It is widely used in numerous industrial fields with comprehensive requirements for drying speed, solubility and environmental safety.

Our core value lies in:

High-quality and stable performance: Using advanced catalytic processes and distillation technology, we ensure the purity of the product (typical industrial grade ≥ 99.0%, electronic grade can reach higher standards), moisture, color, and key impurity content are all at the industry-leading level, with extremely high batch consistency, ensuring the stability of downstream customers’ production processes and the uniformity of product quality.

Wide and specialized application fields: Our technical team deeply understands the application characteristics and formulation requirements of PM in various industries such as coatings and inks, industrial cleaning, pesticide formulations, electronic chemicals and daily chemicals. We can provide customers with targeted product selection suggestions, formulation debugging support and solvent replacement solutions, helping customers improve product performance and market competitiveness.

Efficient and reliable supply chain: Relying on our warehousing and logistics hub in the East China region, we have established a fast-response distribution network, capable of flexibly providing various supply methods from standard packaging (such as 200 kilograms/pail, IBC ton containers) to truck transportation, ensuring the smooth execution of customers’ production plans.

Compliance and safety throughout the process: We provide complete and standardized product technical documents, including safety data sheets (SDS), quality inspection reports and compliance statements that comply with relevant domestic and international regulations (such as REACH), ensuring the safety and compliance of the product throughout the entire chain from production, transportation to use.

Anhui Eapearl Chemical Co., Ltd. promises that with high-quality propylene glycol methyl ether (PM) products as the carrier and professional technical services as the support, we will jointly face the challenges of environmental regulations upgrading and industrial technological innovation with customers, creating green and efficient chemical solutions. Choosing Yipu Chemical is choosing a reliable, professional and sustainable supply guarantee.

Propylene Glycol Monomethyl Ether (PM) Multi-functional Solution | Suitable for coatings, cleaning, pesticides, electronics and other applications | High cost-effectiveness, strong solubility

Propylene Glycol Monomethyl Ether (PM) Multi-functional Solution | Suitable for coatings, cleaning, pesticides, electronics and other applications | High cost-effectiveness, strong solubility

Delivery&Payment method

Propylene Glycol Monomethyl Ether (PM) Multi-functional Solution | Suitable for coatings, cleaning, pesticides, electronics and other applications | High cost-effectiveness, strong solubility

Frequently asked

In what packaging is Propylene glycol monomethyl ether (PM) shipped?

Standard formats are Drum (225 kg), IBC Drum (1127 kg), ISO tank (20ft) (24–26 m³), ISO tank (40ft) (48–50 m³). Other packaging can be arranged for full-container orders.

Is a safety data sheet available for Propylene glycol monomethyl ether (PM)?

Yes. A full safety data sheet for CAS 107-98-2 is published and linked from this page; a signed copy is issued with the shipping documents.

What purity do you supply?

The standard grade is 99%. Tighter specifications are confirmed against the production batch before shipment.

Technical reading on Propylene glycol monomethyl ether (PM)

Which glycol ether: propylene or ethylene

How to pick a glycol ether: propylene versus ethylene series, chain length and evaporation, and three very different…

Article

Related products

Diethylene Glycol Monoethyl Ether

Diethylene Glycol Monoethyl Ether

Kabichol

CAS 111-90-0 99.0% Ether SDS Danger
Dipropylene glycol monobutyl ether

Dipropylene glycol monobutyl ether

DPnB

CAS 29911-28-2 99.0% Ether SDS Warning
Diethylene glycol monohexyl ether

Diethylene glycol monohexyl ether

hexyl caprolactone

CAS 112-59-4 99.0% Ether SDS Danger
🧬 3D-Molekül-Visualisierer
Molekül wird geladen...
3D-Modell 1-Methoxy-2-propanol, CAS 107-98-2, Summenformel C4H10O2, molare Masse 90.12 g/mol

Daten transkribiert aus regulatorischen Registern und Fachliteratur, unter Angabe von Quelle und Ausgabe. Sie ersetzen nicht das Sicherheitsdatenblatt des Lieferanten. Felder ohne hinterlegte Quelle sind als solche gekennzeichnet.

📊 Physikochemische Daten — CAS 107-98-2MolGod_PROPHUB_MAIN
📊 Physikochemische Eigenschaften

Kurzübersicht

Formel: C4H10O2
MW: 90.12 g/mol
CAS: 107-98-2
🔬 Erweiterte Eigenschaften

Chemische Kennungen

SMILES: CC(COC)O

Zuletzt aktualisiert: unbestätigt

Chemische Übersicht: 1-Methoxy-2-propanolMolGod_OVERVIEW_1
SummenformelC4H10O2[1]
Molekulargewicht90.12 g/mol[1]
LogP (Lipophilie)-0.2[1]
IUPAC-Name1-methoxypropan-2-ol[1]
SMILESCC(COC)O[1]
InChIKeyARXJGSRGQADJSQ-UHFFFAOYSA-N[1]

Datenquellen: PubChem (NLM/NIH)
Zuletzt aktualisiert: 2026-09-03

📚 Wissenschaftliche Referenzen (Chicago Author-Date) (1 Quellen)
  1. PubChem. National Center for Biotechnology Information (NIH/NLM), chemical compound database. ↗ dotyczy: Summenformel · Molekulargewicht · LogP (Lipophilie) · IUPAC-Name · SMILES · InChIKey

WISSENSCHAFTLICHE FORSCHUNG

[1]PubMed2015
Anaerobic removal of 1-methoxy-2-propanol under ambient temperature in an EGSB reactor.
Lafita C, Penya-roja JM, Gabaldón C. (2015). "Anaerobic removal of 1-methoxy-2-propanol under ambient temperature in an EGSB reactor.". Bioprocess and biosystems engineering. https://doi.org/10.1007/s
Zur vollständigen Studie ↗
[2]PubMed1997
Biological monitoring of occupational exposure to 1-methoxy-2-propanol.
Laitinen J, Liesivuori J, Savolainen H. (1997). "Biological monitoring of occupational exposure to 1-methoxy-2-propanol.". Journal of chromatography. B, Biomedical sciences and applications. https://d
Zur vollständigen Studie ↗
📚 Wissenschaftliche Referenzen (Chicago Author-Date) 2 refs · 1 baz

MOLECULE Bibliografie pro CAS (live aus 13+ Datenbanken)

Quellen: db:pubmed (2)

  1. db:pubmed Lafita C, Penya-roja JM, Gabaldón C. (2015). "Anaerobic removal of 1-methoxy-2-propanol under ambient temperature in an EGSB reactor.". Bioprocess and biosystems engineering. https://doi.org/10.1007/s00449-015-1453-0 →
  2. db:pubmed Laitinen J, Liesivuori J, Savolainen H. (1997). "Biological monitoring of occupational exposure to 1-methoxy-2-propanol.". Journal of chromatography. B, Biomedical sciences and applications. https://doi.org/10.1016/s0378-4347(97)00087-x →
Regulatorischer Status der Substanz
Diese Substanz unterliegt regulatorischen Anforderungen: Bewirtschaftung gefährlicher Abfälle (BDO-Register). Details im Abschnitt "Regulatorischer Status (REACH/ECHA/CLP)" und im SDS. Regulatorische Information — schränkt den Kauf in diesem Shop nicht ein.
🧮 Stöchiometrie-RechnerMolGod_STOICH_1
🧪 Chemische DatenMolGod_CHEMDATA_1
CAS-Nummer
107-98-2
Summenformel
C4H10O2
Molmasse
90.12 g/mol
IUPAC-Name (EN)
1-methoxypropan-2-ol
SMILES
CC(COC)O
InChIKey
ARXJGSRGQADJSQ-UHFFFAOYSA-N
📡 Data sourcesMolGod_SOURCES_1

The data in this widget comes from the following verified scientific sources:

  • PubChem — National Center for Biotechnology Information (NCBI/NIH), USA
  • ChEMBL — European Bioinformatics Institute (EMBL-EBI), UK
  • NIST WebBook — National Institute of Standards and Technology, USA

Data is cached locally for speed — the widget also works offline.

⚗️ Physicochemical propertiesMolGod_PHYSTAB_2
Temp. wrzenia
118.6

Source: PubChem, NIST WebBook. Last updated: date not confirmed

🔍 Externe IdentifikatorenMolGod_EXTID_1
11 von 16 ID-Systemen69%
DatenbankIdentifikatorAktionen
CAS Registry Number107-98-2Öffnen →
PubChem CID7900[1]Öffnen →
InChIKeyARXJGSRGQADJSQ-UHFFFAOYSA-N[1]Öffnen →
SMILESCC(COC)O[1]
EC Number203-539-1[2]Öffnen →
ChEMBLCHEMBL3186306[3]Öffnen →
HMDBHMDB0243915Öffnen →
ChemSpider7612[4]Öffnen →
UNII (FDA)74Z7JO8V3UÖffnen →
NSC Number (NCI)2409Öffnen →
WikiData QIDQ1884806Öffnen →

Quellen: PubChem (NIH), Wikidata SPARQL, KEGG, ChEMBL (EBI), CompTox CTX (EPA).

📚 Wissenschaftliche Referenzen (Chicago Author-Date) (4 Quellen)
  1. PubChem. National Center for Biotechnology Information (NIH/NLM), chemical compound database. ↗ dotyczy: PubChem CID · InChIKey · SMILES
  2. ECHA. EC Inventory — EINECS, ELINCS, NLP and List Numbers assigned under REACH. Helsinki: European Chemicals Agency. ↗ dotyczy: EC Number
  3. ChEMBL. European Bioinformatics Institute (EMBL-EBI), bioactivity database. ↗ dotyczy: ChEMBL
  4. ChemSpider. Royal Society of Chemistry, chemical structure database. ↗ dotyczy: ChemSpider

Dalsza literatura

Publications thematically related to this CAS. They are not the source of any value given on this card.

Bibliografie (erweitert) (4)

  1. ★★★★★ CANONICAL_PAPERS 💰 Paywall (wahrsch.) ❓ nicht verifiziert Laitinen J; Liesivuori J; Savolainen H. 1997. "Biological monitoring of occupational exposure to 1-methoxy-2-propanol." Journal of chromatography. B, Biomedical sciences and applications. Link [abgerufen: 2026-09-23]
  2. ★★☆☆☆ CROSSREF 🔓 OFFEN ❓ nicht verifiziert Wang, Baohe, Rong, Mingjie, Zhu, Jing, Chen, Shuang, Wei, Dongwei. 2017. "Isobaric Vapor–Liquid Equilibria for (Water + 1-Methoxy-2-propanol), (Water + 2-Methoxy-1-propanol), and (1-Methoxy-2-propanol + 2-Methoxy-1-propanol) at 101.3 kPa." Journal of Chemical & Engineering Data 62 (4): 1341-1347. https://doi.org/10.1021/acs.jced.6b00895. Link [abgerufen: 2026-09-23] CC0 (metadata)
  3. ★★☆☆☆ CROSSREF 🔓 OFFEN ❓ nicht verifiziert Pal, Amalendu, Sharma, Sanjay, Singh, Yoginder P.. 1997. "Excess Molar Volumes of Binary Liquid Mixtures of 1-Propanol and of 2-Propanol + Propane-1,2-diol, 1-Methoxy-2-propanol, 1-Ethoxy-2-propanol, and 1-<i>tert</i>-Butoxy-2-propanol and Water + 1-Methoxy-2-propanol and 1-Ethoxy-2-propanol at 298.15 K." Journal of Chemical & Engineering Data 42 (6): 1157-1160. https://doi.org/10.1021/je970106i. Link [abgerufen: 2026-09-23] CC0 (metadata)
  4. ★☆☆☆☆ CANONICAL_PAPERS ❓ ? ❓ nicht verifiziert Yeon S; Kim SH; Sim J et al.. 2022. "Major component causing neurological toxicity in acute glufosinate ammonium poisoning: determination of glufosinate, 1-methoxy-2-propanol, and ammonia in serum and cerebrospinal fluid." Clinical toxicology (Philadelphia, Pa.). Link [abgerufen: 2026-09-23]
📡 Spektroskopie — CAS 107-98-2MolGod_SPECHUB_MAIN
📊 Spektren (NMR, IR, MS, UV-Vis) (1)

Verfügbare Spektrentypen: IR

IR-Spektrum (KBr, 4000-400 cm⁻¹)

440 Datenpunkte · Quelle: NIST WebBook · NIST ↗ · 📥 JCAMP-DX
🎓 Leitfaden zur Spektreninterpretation (für Studierende)
Wie man ein IR-Spektrum liest
  • 3200-3600 cm⁻¹ — O-H-Streckschwingung (breiter Peak = Wasserstoffbrücke)
  • 2850-3000 cm⁻¹ — C-H-Streckschwingung (sp³)
  • 1650-1750 cm⁻¹ — C=O-Streckschwingung (Ketone, Aldehyde, Ester)
  • 1400-1600 cm⁻¹ — Schwingungen des aromatischen Rings
  • 1000-1300 cm⁻¹ — C-O-Streckschwingung (Ether, Alkohole)
  • Keine Absorption = keine funktionelle Gruppe → mit einer Referenz vergleichen

Quellen: LibreTexts ↗, Silverstein (Spectrometric ID) ↗

📚 Wissenschaftliche Referenzen (Chicago Author-Date) (7 Quellen)
  1. National Institute of Standards and Technology. 2024. "NIST Chemistry WebBook, SRD 69." Gaithersburg, MD: NIST. Accessed 2025-01-01. ↗
  2. Spectral Database for Organic Structure Determination (SDBS). 2024. National Institute of Advanced Industrial Science and Technology (AIST), Japan. Accessed 2025-01-01. ↗
  3. Ulrich, Eldon L., Hideo Akutsu, John F. Doreleijers, Yoko Harano, Yannis E. Ioannidis, Jundong Lin, Miron Livny, et al. 2008. "BioMagResBank." Nucleic Acids Research 36 (D1): D402–D408. [DOI ↗]
  4. Horai, Hisayuki, Masanori Arita, Shigehiko Kanaya, Yoshito Nihei, Tasuku Ikeda, Kazuhiro Suwa, Yuya Ojima, et al. 2010. "MassBank: A Public Repository for Sharing Mass Spectral Data for Life Sciences." Journal of Mass Spectrometry 45 (7): 703–714. [DOI ↗]
  5. Linstrom, P.J., and W.G. Mallard, eds. 2024. NIST Chemistry WebBook, NIST Standard Reference Database Number 69. Gaithersburg, MD: National Institute of Standards and Technology. ↗
  6. McDonald, M. Shane, Mike McAvoy, and Ajit Bhalerao. 1988. "JCAMP-DX: A Standard Form for Exchange of Infrared Spectra in Computer Readable Form." Applied Spectroscopy 42 (1): 151–162. [DOI ↗]
  7. PubChem. 2024. "PubChem Compound Database." National Library of Medicine, National Institutes of Health. Accessed 2025-01-01. ↗
Strukturelle EigenschaftenMolGod_STRUCT3D_1

Strukturdaten werden geladen...

❓ Häufig gestellte Fragen (4)MolGod_FAQ_1
What is the boiling point of 107-98-2?
The boiling point of 107-98-2 is 118.6.
Hilfreich?
What is 107-98-2?
107-98-2 (CAS 107-98-2) is a chemical compound. The chemical data comes from PubChem (National Institutes of Health, USA).
Hilfreich?
What is the CAS number of 107-98-2?
The CAS number for 107-98-2 is 107-98-2. A CAS Registry Number is the standard identifier for a chemical substance in scientific literature and in trade.
Hilfreich?
How should 107-98-2 be stored?
107-98-2 should be stored as its safety data sheet directs \— typically in a dry, cool, well-ventilated place, away from heat and from materials it is incompatible with.
Hilfreich?
➕ Frage vorschlagen
Strukturdateien herunterladenMolGod_STRDL_1

Molekülstrukturdateien aus der PubChem-Datenbank (NIH). Kompatibel mit Avogadro, PyMOL, Jmol und ChemDraw.

Quelle: PubChem, National Library of Medicine (NIH). CID: 7900

🔄 Umrechner für Konzentrationseinheiten LIVE MolGod_UNITCONV_1

Geben Sie die Konzentration 1-Methoxy-2-propanol in einer beliebigen Einheit ein — der Rest wird automatisch berechnet.

MW: 90.12 g/mol · IUPAC Gold Book ↗

⚗️ Umrechnungsformeln + Zitate (pro Formel)
UmrechnungFormelGenauigkeitQuelle
% (w/v) ↔ molarityc (mol/L) = (% × 10) / MW±0.5% rel. when density ≈ 1.0 g/mLIUPAC (2019)
millimolar ↔ molarc (mol/L) = mM × 10⁻³ExactCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
molarity (mol/L)c = n/V = (m/MW)/V±0.1% (depends on MW precision)IUPAC (2019)
parts per million (mg/L) ↔ molarityc (mol/L) = ppm / (1000 × MW); equivalently ppm = mg/L for dilute aqueous±1% (density-independent for dilute solutions)IUPAC (2019)
mg/mL ↔ molarityc (mol/L) = (mg/mL × 1000) / MW / 1000 = mg/mL / MW × 1±0.2%Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
g/L ↔ molarityc (mol/L) = (g/L) / MW±0.1% (depends on MW precision)Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
mmol/L ↔ molarityc (mol/L) = mmol/L × 10⁻³ExactCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
Celsius ↔ KelvinT(K) = t(°C) + 273.15±0.01 K (ITS-90 scale)BIPM (Bureau International des Poids et Mesures) (2019)
Celsius ↔ FahrenheitT(°F) = T(°C) × 9/5 + 32±0.1 °FThompson A, Taylor BN (2008)
density-corrected % ↔ molarityc (mol/L) = (%w/w × ρ × 10) / MW, ρ in g/mL±0.1% when ρ known to 3 decimalsCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
📚 Bibliographie (8 autoritative Quellen)
  1. Thompson A, Taylor BN (2008). Guide for the Use of the International System of Units (SI). NIST Special Publication 811 · DOI: 10.6028/NIST.SP.811-2008
    → Primary SI standard for US scientific usage
  2. Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007). Quantities, Units and Symbols in Physical Chemistry — The IUPAC Green Book. RSC Publishing, 3rd ed. · DOI: 10.1039/9781847557889 · ISBN: 978-0-85404-433-7
    → Canonical IUPAC guide for chemistry quantities/units
  3. BIPM (Bureau International des Poids et Mesures) (2019). The International System of Units (SI), 9th edition. BIPM · ↗
    → International SI definitions (incl. redefined kilogram 2019)
  4. ISO/IEC (2022). Quantities and units — Part 1: General. International Organization for Standardization — ISO 80000-1:2022 · ↗
    → General rules for physical quantities and units
  5. ISO/IEC (2019). Quantities and units — Part 9: Physical chemistry and molecular physics. International Organization for Standardization — ISO 80000-9:2019 · ↗
    → Concentration / molality / amount-of-substance conventions
  6. Tiesinga E, Mohr PJ, Newell DB, Taylor BN (2021). CODATA recommended values of the fundamental physical constants: 2018. Rev. Mod. Phys. 93(2):025010 · DOI: 10.1103/RevModPhys.93.025010
    → Avogadro, gas constant, molar volume (2019 SI revision)
  7. IUPAC (2019). Compendium of Chemical Terminology — the IUPAC Gold Book (online). IUPAC · DOI: 10.1351/goldbook
    → Definitions of mass fraction, molality, normality, ppm, activity
  8. Mills IM, Cvitaš T, Homann K, Kallay N, Kuchitsu K (1988). Quantities, Units and Symbols in Physical Chemistry. Blackwell Scientific Publications, 1st ed. · ISBN: 0-632-01773-5
    → Historical predecessor of IUPAC Green Book
Ähnliche MolekülstrukturenMolGod_SIMSTR_1

Ähnliche Strukturen werden geladen...

🧪 Assistent zur Lösungsvorbereitung WIZARD MolGod_PREP_1
① Konzentration auswählen
② Zielvolumen
③ Lösungsmittel

Berechnungen nach: IUPAC Gold Book ↗, Merck ↗

ComputerchemieMolGod_COMPCHEM_1

Berechnungsdaten werden geladen...

🛡️ Sicherheit — CAS 107-98-2MolGod_SAFEHUB_MAIN
Hinweis zu Datenbeschränkungen. Die Sicherheitsinformationen auf dieser Seite dienen nur zur Information und ersetzen kein vollständiges Sicherheitsdatenblatt (SDS). Konsultieren Sie vor der Verwendung des Produkts das aktuelle Sicherheitsdatenblatt des Herstellers sowie die GHS/CLP-Leitlinien. Die CLP-Einstufung bezieht sich auf die reine Bulk-Substanz, nicht auf handelsübliche Zubereitungen.

GHS/CLP-Einstufung — Verordnung (EG) Nr. 1272/2008 + UN GHS Rev. 9 (2021).

⚠ Achtung (Warning)
GHS02 — Entzündbar
GHS02 Entzündbar
GHS07 — Reizend / gesundheitsschädlich
GHS07 Reizend / gesundheitsschädlich

🚨 Gefahrenhinweise (H)

  • H226 — Flüssigkeit und Dampf entzündbar.
  • H336 — Kann Schläfrigkeit und Benommenheit verursachen.

🛡 Sicherheitshinweise (P)

  • P210 — Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellenarten fernhalten. Nicht rauchen.

✓ Harmonisierte Einstufung gemäß Anhang VI der CLP-Verordnung (EG) 1272/2008 (amtliche, verbindliche Einstufung). Indexnummer: 603-064-00-3.

Referenz (Chicago): European Chemicals Agency. "1-methoxy-2-propanol; monopropylene glycol methyl ether, Index No. 603-064-00-3." In Table 3 of Annex VI to Regulation (EC) No 1272/2008 (CLP Regulation), 23rd Adaptation to Technical Progress (harmonised list as of 2026-07-07). Helsinki: European Chemicals Agency, 2026. https://echa.europa.eu/information-on-chemicals/annex-vi-to-clp.

Übersetzungen: CLP-Verordnung (EG) 1272/2008, Anhang III und IV. Daten: PubChem/NLM.

📚 Konsolidierte wissenschaftliche Referenzen — Chicago Author-Date 10 Quellen

Referenzen aus allen Safety-Hub-Registerkarten gesammelt. CAS: 107-98-2 · PubChem ↗

  1. Parlament Europejski i Rada UE. 2008. "Rozporządzenie (WE) nr 1272/2008 w sprawie klasyfikacji, oznakowania i pakowania substancji (CLP)." Dz.Urz. UE L 353. [↗] GHS, Vorschriften
  2. United Nations Economic Commission for Europe (UNECE). 2021. "Globally Harmonized System of Classification and Labelling of Chemicals (GHS), Ninth Revised Edition." United Nations, Geneva. [↗] GHS
  3. Goldfrank, Lewis R., Robert S. Hoffman, Mary Ann Howland, et al.. 2019. "Goldfrank's Toxicologic Emergencies, 11th ed.." McGraw-Hill Education, New York. ISBN 978-1-25-985961-8. Pierwsza pomoc, Toksykologia
  4. National Institute for Occupational Safety and Health (NIOSH). 2023. "NIOSH Pocket Guide to Chemical Hazards (DHHS Publ. 2005-149)." U.S. Department of Health and Human Services / CDC, Cincinnati, OH. [↗] Pierwsza pomoc, PPE, Toksykologia
  5. European Committee for Standardization (CEN). 2016. "EN 374-1:2016 — Protective gloves against dangerous chemicals and micro-organisms." CEN, Brussels. [↗] PPE
  6. UNECE. 2023. "European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR 2025)." United Nations, Geneva. [↗] Utylizacja, Regulacje
  7. National Fire Protection Association (NFPA). 2022. "NFPA 400 — Hazardous Materials Code." NFPA, Quincy, MA. [↗] Magazynowanie
  8. Urben, P.G. (ed.). 2017. "Bretherick's Handbook of Reactive Chemical Hazards, 8th ed.." Butterworth-Heinemann / Elsevier, Oxford. [↗] Magazynowanie
  9. Ministerstwo Klimatu i Środowiska RP. 2023. "Baza danych o produktach i opakowaniach oraz o gospodarce odpadami (BDO)." Ministerstwo Klimatu i Środowiska, Warszawa. [↗] Utylizacja
  10. International Agency for Research on Cancer (IARC / WHO). 2024. "IARC Monographs on the Identification of Carcinogenic Hazards to Humans — List of Classifications." WHO, Lyon. [↗] Toksykologia

Registerkarten mit eigenen Referenzen (Emergency, PPE, Storage, Waste) enthalten zusätzliche bibliografische Einträge in ihren jeweiligen Abschnitten.

📈 Analytische Statistik (t-Test · RSD · Grubbs · Q-Dixon) ICH Q2

Fügen Sie eine Serie von Messwiederholungen ein (CSV oder eine Zahl pro Zeile). Der Rechner berechnet Mittelwert, Standardabweichung und 95% CI und erkennt Ausreißer (Grubbs + Dixon Q).

Trennzeichen: Komma, Leerzeichen, Tab, Zeilenumbruch. Min. 3 Messungen.
📐 Statistische Formeln
  • x̄ = Σxᵢ / n — arithmetisches Mittel
  • s² = Σ(xᵢ - x̄)² / (n-1) — Stichprobenvarianz
  • s = √s² — Standardabweichung
  • RSD% = (s / x̄) × 100% — relative Standardabweichung
  • CI₉₅ = x̄ ± t(0.05, n-1) × s / √n — Student's t
  • G = |xᵢ - x̄| / s — Grubbs-Test
  • Q = |xsuspect - xnearest| / |xmax - xmin| — Dixon Q-test

Quelle: ICH Q2(R2) Validation of Analytical Procedures · ICH PDF ↗

🧪 Puffer-Rezept-Rechner EINZIGARTIG
Literatur: pKa-Werte aus Goldberg NIST 81 · CRC Handbook 100th ed. · Stoll & Blanchard 1990 (DOI)

Wählen Sie einen Puffer aus der Liste von 20 gängigen Systemen → geben Sie den Ziel-pH-Wert ein → Sie erhalten ein exaktes Rezept mit den einzuwiegenden Massen.

Schritt 1: Puffersystem wählen

📜 Rezeptverlauf (letzte 10)
Pharmakologischer Status

Prekliniczny

Phase I
Phase II
Phase III
Zugelassen

Präklinisch — keine Daten aus Studien am Menschen.

ChEMBL CHEMBL3186306 ↗

Bibliografie (erweitert) (2)

  1. ★★☆☆☆ CROSSREF 🔓 OFFEN ❓ nicht verifiziert Wang, Baohe, Rong, Mingjie, Zhu, Jing, Chen, Shuang, Wei, Dongwei. 2017. "Isobaric Vapor–Liquid Equilibria for (Water + 1-Methoxy-2-propanol), (Water + 2-Methoxy-1-propanol), and (1-Methoxy-2-propanol + 2-Methoxy-1-propanol) at 101.3 kPa." Journal of Chemical & Engineering Data 62 (4): 1341-1347. https://doi.org/10.1021/acs.jced.6b00895. Link [abgerufen: 2026-09-23] CC0 (metadata)
  2. ★★☆☆☆ CROSSREF 🔓 OFFEN ❓ nicht verifiziert Pal, Amalendu, Sharma, Sanjay, Singh, Yoginder P.. 1997. "Excess Molar Volumes of Binary Liquid Mixtures of 1-Propanol and of 2-Propanol + Propane-1,2-diol, 1-Methoxy-2-propanol, 1-Ethoxy-2-propanol, and 1-<i>tert</i>-Butoxy-2-propanol and Water + 1-Methoxy-2-propanol and 1-Ethoxy-2-propanol at 298.15 K." Journal of Chemical & Engineering Data 42 (6): 1157-1160. https://doi.org/10.1021/je970106i. Link [abgerufen: 2026-09-23] CC0 (metadata)
📅 Project Planner — Manager für Laborexperimente NEU

Planen Sie Ihr gesamtes Laborprojekt: Fügen Sie Experimente mit Reagenzien, Wiederholungen und Dauer hinzu. Sie erhalten ein Gantt-Diagramm, eine Einkaufsliste (mit Links zum Shop!), ein Budget mit 10% Reserve und eine GHS-Risikomatrix.

🧪 Löslichkeit und Lösungsmittelkompatibilität MolGod_SOLUB_1
Molekül
1-Methoxy-2-propanol
Formel
C4H10O2
logP (XLogP3)
-0.20
Masse (g/mol)
90.12
Polarität
Hydrophil (polar)

⚠️ GC-Schätzung (Hoftyzer–Van Krevelen). Keine HSP-Literaturdaten für diese CAS — Genauigkeit ±2 MPa½. Experimentell verifizieren.

Solvent compatibility table not available for this substance.
The Hansen parameters fall outside the range of the method, so the distance Ra cannot be calculated, and the database holds no solubility measurement to put in its place. Rather than eleven ratings with nothing behind them, we show none. Base the solvent choice on the safety data sheet and on experimental data.
📚 Wissenschaftliche Referenzen für Lösungsmittel (Chicago Author-Date) — zum Aufklappen klicken

11 solvents · 54 full citations (NIST/CRC/IARC/Hansen/Reichardt/Smallwood/Wypych/Armarego/Snyder/GESTIS) — below.

Water (H₂O)
  1. NIST — NIST Chemistry WebBook — Water (CAS 7732-18-5)
  2. CRC — CRC Handbook of Chemistry and Physics, 104th ed., Sec. 8 (Properties of Water)
  3. IAPWS — IAPWS Release on Static Dielectric Constant of Water
  4. Reichardt 2011 — Solvents and Solvent Effects in Organic Chemistry
  5. GESTIS — GESTIS Substance Database — Water
Ethanol (EtOH)
  1. NIST — NIST Chemistry WebBook — Ethanol (CAS 64-17-5)
  2. CRC — CRC Handbook — Ethanol physical constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — Ethanol eluotropic
  4. Smallwood — Handbook of Organic Solvent Properties — Ethanol
  5. GESTIS — GESTIS Substance Database — Ethanol
Methanol (MeOH)
  1. NIST — NIST Chemistry WebBook — Methanol (CAS 67-56-1)
  2. CRC — CRC Handbook — Methanol physical constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — MeOH eluotropic, eo=0.95
  4. GESTIS — GESTIS Substance Database — Methanol
Acetone
  1. NIST — NIST Chemistry WebBook — Acetone (CAS 67-64-1)
  2. CRC — CRC Handbook — Acetone physical & thermodynamic constants
  3. Hansen 2007 — Hansen Solubility Parameters — Acetone (dD=15.5, dP=10.4, dH=7.0)
  4. Smallwood — Handbook of Organic Solvent Properties — Acetone
  5. GESTIS — GESTIS Substance Database — Acetone
Acetonitrile (ACN)
  1. NIST — NIST Chemistry WebBook — Acetonitrile (CAS 75-05-8)
  2. CRC — CRC Handbook — Acetonitrile constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — ACN gold-standard HPLC eluent
  4. Reichardt 2011 — Solvents and Solvent Effects — ACN dipolar aprotic
  5. GESTIS — GESTIS Substance Database — Acetonitrile
DMSO
  1. NIST — NIST Chemistry WebBook — DMSO (CAS 67-68-5)
  2. Wypych 2019 — Handbook of Solvents Vol. 1 — DMSO comprehensive properties
  3. Hansen 2007 — HSP — DMSO (dD=18.4, dP=16.4, dH=10.2)
  4. Reichardt 2011 — Solvents and Solvent Effects — DMSO E_T(30)=45.1, dipolar aprotic
  5. GESTIS — GESTIS Substance Database — DMSO
THF
  1. NIST — NIST Chemistry WebBook — THF (CAS 109-99-9)
  2. Armarego 2009 — Purification of Laboratory Chemicals — THF drying & peroxide test
  3. Hansen 2007 — Hansen Solubility Parameters — THF (dD=16.8, dP=5.7, dH=8.0)
  4. Smallwood — Handbook of Organic Solvent Properties — THF
  5. GESTIS — GESTIS Substance Database — Tetrahydrofuran
DCM (CH₂Cl₂)
  1. NIST — NIST Chemistry WebBook — Dichloromethane (CAS 75-09-2)
  2. IARC 71 — IARC Monograph 71 — DCM (Group 2A carcinogen)
  3. Hansen 2007 — Hansen Solubility Parameters — DCM (dD=18.2, dP=6.3, dH=6.1)
  4. Reichardt 2011 — Solvents and Solvent Effects — DCM polarity index
  5. GESTIS — GESTIS Substance Database — Dichloromethane
Chloroform (CHCl₃)
  1. NIST — NIST Chemistry WebBook — Chloroform (CAS 67-66-3)
  2. IARC 73 — IARC Monograph 73 — Chloroform (Group 2B carcinogen)
  3. Hansen 2007 — Hansen Solubility Parameters — CHCl3 (dD=17.8, dP=3.1, dH=5.7)
  4. Reichardt 2011 — Solvents and Solvent Effects — CHCl3 H-bond donor strength
  5. GESTIS — GESTIS Substance Database — Chloroform
n-Hexane
  1. NIST — NIST Chemistry WebBook — n-Hexane (CAS 110-54-3)
  2. ATSDR n-Hexane — ATSDR Toxicological Profile for n-Hexane — neuropatia obwodowa (n-Heksan NIE jest kancerogenem IARC)
  3. Hansen 2007 — Hansen Solubility Parameters — n-Hexane (dD=14.9, dP=0, dH=0)
  4. Snyder & Kirkland — Modern Liquid Chromatography — n-Hexane NP standard, eo=0.00
  5. GESTIS — GESTIS Substance Database — n-Hexane
Toluene
  1. NIST — NIST Chemistry WebBook — Toluene (CAS 108-88-3)
  2. IARC 71 — IARC Monograph 71 — Toluene
  3. Hansen 2007 — Hansen Solubility Parameters — Toluene (dD=18.0, dP=1.4, dH=2.0)
  4. Smallwood — Handbook of Organic Solvent Properties — Toluene
  5. GESTIS — GESTIS Substance Database — Toluene
Löslichkeitstheorie (angewendet in der Verträglichkeitsvorhersage):
  1. Yalkowsky, Samuel H., and Shri C. Valvani. 1980. "Solubility and Partitioning I: Solubility of Nonelectrolytes in Water." Journal of Pharmaceutical Sciences 69 (8): 912–922. https://doi.org/10.1002/jps.2600690814 — General Solubility Equation (GSE): logS = 0.5 − logP − 0.01(MP−25).
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. CRC Press. https://doi.org/10.1201/9781420006834 — HSP-Triplett (dD, dP, dH) + Ra-Formel.
  3. Stefanis, E., and C. Panayiotou. 2008. "Prediction of Hansen Solubility Parameters with a New Group-Contribution Method." Int J Thermophys 29: 568–585. https://doi.org/10.1007/s10765-008-0415-z
  4. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Wiley-VCH. https://doi.org/10.1002/9783527632220 — E_T(30) polarity scale, solwatochromia.
  5. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Wiley. https://doi.org/10.1002/9780470508183 — Eluotropic series, polarity index.
  6. Van Krevelen, D. W., and K. Te Nijenhuis. 2009. Properties of Polymers. 4th ed. Elsevier. https://doi.org/10.1016/B978-0-08-054819-7.X0001-5 — Hoftyzer–Van Krevelen group contribution dla dD/dP/dH z SMILES.
  7. Marcus, Yizhak. 1998. The Properties of Solvents. Wiley Series in Solution Chemistry, Vol. 4. ISBN 9780471983699 — Vollständige tabellarische Sammlung von 250+ Lösungsmitteln (ε, μ, Donizität, Akzeptorzahlen).
  8. PubChem Compound Database — CAS 107-98-2 lookup ↗ — logP (XLogP3), water solubility experimental + predicted.

Vollständige Bibliografie im Akkordeon REFERENZEN (am Ende der Seite) — Chicago Manual of Style 17th ed., Author-Date.

⚗️ Reaktionskompatibilität prüfen MolGod_RXNCOMP_1
1 2 0
Gesundheit: 1/4
Entflammbarkeit: 2/4
Reaktivität: 0/4
Gemäß NFPA 704 / berechnet aus H-Sätzen

Prüfen Sie, ob 1-Methoxy-2-propanol mit einem anderen Reagenz verträglich ist

📦 Lagerverträglichkeitsmatrix
Acids Regeln Oxidationsmittel Entzündbar Giftig Gazy
Acids ✓ ✗ ✗ ✗ ⚠ ✗
Regeln ✗ ✓ ⚠ ⚠ ⚠ ⚠
Oxidationsmittel ✗ ⚠ ✓ ✗ ⚠ ✗
Entzündbar ✗ ⚠ ✗ ✓ ⚠ ✗
Giftig ⚠ ⚠ ⚠ ⚠ ✓ ⚠
Gazy ✗ ⚠ ✗ ✗ ⚠ ✓
✓ Gemeinsame Lagerung möglich · ⚠ Vorsicht · ✗ NICHT zusammen lagern · OSHA Chemical Segregation ↗

Verträglichkeitsdaten aus: Bretherick's Handbook (7th ed.) ↗, GESTIS ↗, ECHA REACH ↗, NFPA 704 ↗

🧮 Laborrechner (8) MolGod_LABCALC_1
Verdünnung (C₁V₁=C₂V₂)
Molarität (M=n/V)
pH-Puffer (Henderson-Hasselbalch)
Beer-Lambert (A=εcl)
Masse → Mol
Konzentration % → M
ppm → mg/L
Temperatur C↔F↔K

Verifizierte Formeln: IUPAC Gold Book ↗, DOI ↗

📊 Spektroskopische Spektrendatenbanken MolGod_SPECDB_3
📋 Laborprotokoll-Generator MolGod_PROTOCOL_1

Protokoll erstellt auf Grundlage von: GHS SDS, Aldrich Lab Guide ↗

🏷️ Etiketten-Generator (QR) MolGod_LABEL_1
Propylene Glycol Monomethyl• IUPAC: 1-methoxypropan-2-ol• CAS: 107-98-2• EC: 203-539-1• Formel: C4H10O2• Masse: 90.12 g/molACHTUNGGHS-GEFAHRENHINWEISE:H226: Flüssigkeit und Dampf entzündbar.H336: Kann Schläfrigkeit und Benommenheit verursachen.P210: Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderenZündquellenarten fernhalten. Nicht rauchen.Anhui Eapearl Chemical Co., Ltd.12th Floor, Tongguan Number Valley, Tongling, Anhui, China+86 186 5620 1888[email protected]epchems.com
Deskryptory Lipinskiego (struktura)

Drug-Likeness-Radardiagramm (Lipinski Ro5 / Veber). Grüne Zone = Übereinstimmung mit den Kriterien.

Vorhersagedaten — in silico berechnete Eigenschaften (SMILES/RDKit). Sie ersetzen keine klinischen Studien. Nicht zur Arzneimittelbewertung ohne experimentelle Verifizierung verwenden.

MW90.1LogP-0.2HBD1HBA2RotB2TPSA29.5 Ų
✓ Lipinski Ro5✓ Veber✓ Egan✗ Ghose (MW=90)✗ REOS (MW=90)✓ Lead-like Ro3
EigenschaftWertBewertung
Resorption (GI)hoch✓
BHS-Permeabilitätja (durchdringt)
Bioverfügbarkeit (Daina 2017)
55%
CYP450-ProfilCYP1A2 non-inhibitorCYP2C9 non-inhibitorCYP2C19 non-inhibitorCYP2D6 non-inhibitorCYP3A4 non-inhibitor
PAINS-Warnungen0✓
Brenk-Warnungen0✓
pKa (pH 7.4)7 (heuristic)
⚠ Toxikologie (pkCSM): ungültige pkCSM-Antwort
hERG (Kardiotox.)—
P-gp-Substrat—
Ames-Mutagenität—
DILI (Hepatotox.)—
LogS (Wasserlösl.)—
Quellen (ADMET-Methodik)
  1. Lipinski, Christopher A., Franco Lombardo, Beryl W. Dominy, and Paul J. Feeney. 1997. "Experimental and computational approaches to estimate solubility and permeability in drug discovery and development settings." Advanced Drug Delivery Reviews 23 (1-3): 3-25.
  2. Veber, Daniel F., Stephen R. Johnson, Hung-Yuan Cheng, et al. 2002. "Molecular properties that influence the oral bioavailability of drug candidates." Journal of Medicinal Chemistry 45 (12): 2615-2623.
  3. Daina, Antoine, Olivier Michielin, and Vincent Zoete. 2017. "SwissADME: a free web tool to evaluate pharmacokinetics, drug-likeness and medicinal chemistry friendliness." Scientific Reports 7: 42717.
  4. Egan, William J., and Gregory Lauri. 2002. "Prediction of intestinal permeability." Advanced Drug Delivery Reviews 54 (3): 273-289.
  5. Baell, Jonathan B., and Georgina A. Holloway. 2010. "New substructure filters for removal of pan assay interference compounds (PAINS) from screening libraries." Journal of Medicinal Chemistry 53 (7): 2719-2740.
  6. Brenk, Ruth, Alessandro Schipani, Daniel James, et al. 2008. "Lessons learnt from assembling screening libraries for drug discovery for neglected diseases." ChemMedChem 3 (3): 435-444.
  7. Ertl, Peter, and Ansgar Schuffenhauer. 2009. "Estimation of synthetic accessibility score of drug-like molecules based on molecular complexity and fragment contributions." Journal of Cheminformatics 1: 8.
  8. Bickerton, G. Richard, Gaia V. Paolini, Jérémy Besnard, Sorel Muresan, and Andrew L. Hopkins. 2012. "Quantifying the Chemical Beauty of Drugs." Nature Chemistry 4 (2): 90-98.
  9. Hopkins, Andrew L., and Colin R. Groom. 2002. "The Druggable Genome." Nature Reviews Drug Discovery 1 (9): 727-730.
  10. Ghose, Arup K., Vellarkad N. Viswanadhan, and John J. Wendoloski. 1999. "A Knowledge-Based Approach in Designing Combinatorial or Medicinal Chemistry Libraries for Drug Discovery." Journal of Combinatorial Chemistry 1 (1): 55-68.
  11. Tice, Raymond R., Christopher P. Austin, Robert J. Kavlock, and John R. Bucher. 2013. "Improving the Human Hazard Characterization of Chemicals: A Tox21 Update." Environmental Health Perspectives 121 (7): 756-765.
  12. Leeson, Paul D., and Brian Springthorpe. 2007. "The Influence of Drug-Like Concepts on Decision-Making in Medicinal Chemistry." Nature Reviews Drug Discovery 6 (11): 881-890.
  13. Hann, Michael M. 2011. "Molecular Obesity, Potency and Other Addictions in Drug Discovery." MedChemComm 2 (5): 349-355.
  14. Davies, Mark, Michał Nowotka, George Papadatos, et al. 2015. "ChEMBL Web Services: Streamlining Access to Drug Discovery Data and Utilities." Nucleic Acids Research 43 (W1): W612-W620.
  15. Walters, W. Patrick, and Mark A. Murcko. 2002. "Prediction of 'Drug-Likeness.'". Advanced Drug Delivery Reviews 54 (3): 255–271. https://doi.org/10.1016/S0169-409X(02)00003-0.
  16. Congreve, Miles, Robin Carr, Christopher Murray, and Harren Jhoti. 2003. "A 'Rule of Three' for Fragment-Based Lead Discovery?" Drug Discovery Today 8 (19): 876–877. https://doi.org/10.1016/S1359-6446(03)02831-9.
  17. Brenk, Ruth, Alessandro Schipani, Daniel James, Agata Krasowski, Iain Hugh Gilbert, Julie Frearson, and Paul Graham Wyatt. 2008. "Lessons Learnt from Assembling Screening Libraries for Drug Discovery for Neglected Diseases." ChemMedChem 3 (3): 435-444.
  18. Schomburg, Karen T., Sascha Bietz, Hans Briem, Andrea M. Henzler, Stefan Urbaczek, and Matthias Rarey. 2014. "Facing the Challenges of Structure-Based Target Prediction by Inverse Virtual Screening." Journal of Chemical Information and Modeling 54 (6): 1676-1686.
  19. Bemis, Guy W., and Mark A. Murcko. 1996. "The Properties of Known Drugs. 1. Molecular Frameworks." Journal of Medicinal Chemistry 39 (15): 2887-2893.
  20. Schomburg, Karen T., and Matthias Rarey. 2014. "What Is the Potential of Structure-Based Target Prediction Methods?" Future Medicinal Chemistry 6 (17): 1987-1989.
  21. Lafita C, Penya-roja JM, Gabaldón C. (2015). "Anaerobic removal of 1-methoxy-2-propanol under ambient temperature in an EGSB reactor.". Bioprocess and biosystems engineering. https://doi.org/10.1007/s00449-015-1453-0
  22. Laitinen J, Liesivuori J, Savolainen H. (1997). "Biological monitoring of occupational exposure to 1-methoxy-2-propanol.". Journal of chromatography. B, Biomedical sciences and applications. https://doi.org/10.1016/s0378-4347(97)00087-x
  23. I. A. Lukoyanov, G. Kalashnikova, M. Timofeeva, et al. 2025. "EFFECT OF THE INTERLAYER CATION IN THE AM-4 TITANOSILICATE STRUCTURE ON CATALYTIC PROPERTIES IN THE SYNTHESIS OF 1-METHOXY-2-PROPANOL FROM METHANOL AND PROPYLENE OXIDE." Transaction Kola Science Centre. DOI: 10.37614/2949-1215.2025.16.1.012. [DOI ↗]
  24. Xinyu Liu, Shu Wang, Mingxia Wang, et al. 2024. "Reaction Thermodynamic and Kinetics for Esterification of 1-Methoxy-2-Propanol and Acetic Acid over Ion-Exchange Resin." Molecules. DOI: 10.3390/molecules29194709. PMID: 39407637. [DOI ↗]
  25. T. Don, Ta Ngoc Thien Huy, V. Tran, et al. 2026. "Synthesis of Zeolitic Imidazolate Framework-14 from Zinc Chloride and its Application as a Catalyst for the Synthesis of 1-Methoxy-2-Propanol." Korean Journal of Chemical Engineering. DOI: 10.1007/s11814-025-00619-6. [DOI ↗]
  26. Venkatesh Vispute, Mandar Gaikwad, N. Garad, et al. 2026. "Dielectric relaxation dynamics and hydrogen bonding interactions reveal the molecular association mechanisms in binary mixtures of 3-chloroaniline and 1-methoxy-2-propanol at 298 K." Discover Chemistry. DOI: 10.1007/s44371-026-00961-6. [DOI ↗]
  27. Xingyu Han, Shan Ji, Fangfang Liu, et al. 2025. "Innovatively designed sustainable electrooxidative route to 1-methoxy-2-acetone: Direct anodic dehydrogenation of 1-methoxy-2-propanol." Chinese Journal of Chemical Engineering. DOI: 10.1016/j.cjche.2025.11.015. [DOI ↗]
  28. Jun Gao, Zhenjie Li, Chongyun Ding, et al. 2023. "Separation of 1-methoxy-2-propanol and water by organic solvent extraction based on quantum chemistry calculation and liquid-liquid equilibrium experiment." The Journal of Chemical Thermodynamics. DOI: 10.1016/j.jct.2023.107201. [DOI ↗]
  29. Wang, Baohe; Rong, Mingjie; Zhu, Jing; et al. 2017. "Isobaric Vapor–Liquid Equilibria for (Water + 1-Methoxy-2-propanol), (Water + 2-Methoxy-1-propanol), and (1-Methoxy-2-propanol + 2-Methoxy-1-propanol) at 101.3 kPa." Journal of Chemical & Engineering Data. DOI: 10.1021/acs.jced.6b00895. [DOI ↗]
  30. Wang, Baohe, Rong, Mingjie, Zhu, Jing, Chen, Shuang, Wei, Dongwei. 2017. "Isobaric Vapor–Liquid Equilibria for (Water + 1-Methoxy-2-propanol), (Water + 2-Methoxy-1-propanol), and (1-Methoxy-2-propanol + 2-Methoxy-1-propanol) at 101.3 kPa." Journal of Chemical & Engineering Data 62 (4): 1341-1347. https://doi.org/10.1021/acs.jced.6b00895. [DOI ↗]
  31. Pal, Amalendu; Sharma, Sanjay; Singh, Yoginder P. 1997. "Excess Molar Volumes of Binary Liquid Mixtures of 1-Propanol and of 2-Propanol + Propane-1,2-diol, 1-Methoxy-2-propanol, 1-Ethoxy-2-propanol, and 1-<i>tert</i>-Butoxy-2-propanol and Water + 1-Methoxy-2-propanol and 1-Ethoxy-2-propanol at 298.15 K." Journal of Chemical & Engineering Data. DOI: 10.1021/je970106i. [DOI ↗]
  32. Pal, Amalendu, Sharma, Sanjay, Singh, Yoginder P.. 1997. "Excess Molar Volumes of Binary Liquid Mixtures of 1-Propanol and of 2-Propanol + Propane-1,2-diol, 1-Methoxy-2-propanol, 1-Ethoxy-2-propanol, and 1-<i>tert</i>-Butoxy-2-propanol and Water + 1-Methoxy-2-propanol and 1-Ethoxy-2-propanol at 298.15 K." Journal of Chemical & Engineering Data 42 (6): 1157-1160. https://doi.org/10.1021/je970106i. [DOI ↗]
  33. Zhi-Min Wang, Du Wang, A. E. Mansy, et al. 2025. "Pyrolysis and kinetic modeling investigation of 1-methoxy-2-propanol." Combustion and Flame. DOI: 10.1016/j.combustflame.2024.113804. [DOI ↗]
  34. Xiao-Yan Chen, Yaxin Cai, Chang-Shen Ye, et al. 2023. "Insight into the mechanism for the synthesis of 1-methoxy-2-propanol over basic poly(ionic liquid) catalysts." Applied Catalysis A: General. DOI: 10.1016/j.apcata.2023.119041. [DOI ↗]
  35. Bolton, Evan E., Yanli Wang, Paul A. Thiessen, and Stephen H. Bryant. 2008. "PubChem: Integrated Platform of Small Molecules and Biological Activities." Annual Reports in Computational Chemistry 4: 217-241. [DOI ↗]
  36. Jinta Merlin Johny, Jayanta Parui. 2026. "Effect of 1‐Methoxy‐2‐Propanol for Minimizing BaCO 3 Impurity in Sol‐Gel Derived Barium Zirconate Titanate." ChemistrySelect. DOI: 10.1002/slct.202505102. [DOI ↗]
  37. Kim, Sunghwan, Jie Chen, Tiejun Cheng, et al. 2023. "PubChem 2023 update." Nucleic Acids Research 51 (D1): D1373-D1380. [DOI ↗]
  38. Kim, Sunghwan, Tiejun Cheng, Jianyong He, Chen Cheng, et al. 2021. "PubChem Protein, Pathway, Reaction, and Disease Specifications." Journal of Cheminformatics 13: 16. [DOI ↗]
  39. Hähnke, Volker D., Sunghwan Kim, and Evan E. Bolton. 2018. "PubChem chemical structure standardization." Journal of Cheminformatics 10: 36. [DOI ↗]
  40. Wang, Yanli, Stephen H. Bryant, Tiejun Cheng, Jiyao Wang, et al. 2017. "PubChem BioAssay: 2017 update." Nucleic Acids Research 45 (D1): D955-D963. [DOI ↗]
  41. Cheng, Tiejun, et al. 2014. "Computation of Octanol-Water Partition Coefficients by Guiding an Additive Model with Knowledge." Journal of Chemical Information and Modeling 54 (3): 793-805. [DOI ↗]
  42. 2007. "2‐methoxy‐1‐propanol." Hawley's Condensed Chemical Dictionary. DOI: 10.1002/9780470114735.hawley10577. [DOI ↗]
  43. 2007. "1‐((2,3,6‐trichlorophenyl)methoxy)‐2‐propanol." Hawley's Condensed Chemical Dictionary. DOI: 10.1002/9780470114735.hawley16342. [DOI ↗]
  44. Anonymous. 2007. "2‐methoxy‐1‐propanol." Hawley's Condensed Chemical Dictionary: 814-814. https://doi.org/10.1002/9780470114735.hawley10577. [DOI ↗]
  45. Anonymous. 2007. "1‐((2,3,6‐trichlorophenyl)methoxy)‐2‐propanol." Hawley's Condensed Chemical Dictionary: 1268-1268. https://doi.org/10.1002/9780470114735.hawley16342. [DOI ↗]
  46. PubMed PMID PubChem. (Metadata fetch failed.) ↗
  47. Wilkinson, Mark D., et al. 2016. "The FAIR Guiding Principles for scientific data management and stewardship." Scientific Data 3: 160018. [DOI ↗]
  48. I. Wichterle, J. Linek, Z. Wagner et al. "(+,-)-1-Methoxypropan-2-ol C4H10O2 + C3H8O Propan-2-ol." Landolt-Börnstein - Group IV Physical Chemistry. DOI: 10.1007/978-3-540-49315-0_2148. [DOI ↗]
  49. I. Wichterle, J. Linek, Z. Wagner et al. "Water H2O + C4H10O2 (+,-)-1-Methoxypropan-2-ol." Landolt-Börnstein - Group IV Physical Chemistry. DOI: 10.1007/978-3-540-49315-0_3196. [DOI ↗]
  50. I. Wichterle, J. Linek, Z. Wagner et al. "(+,-)-1-Methoxypropan-2-ol C4H10O2 + C6H14O Diisopropyl ether." Landolt-Börnstein - Group IV Physical Chemistry. DOI: 10.1007/978-3-540-49315-0_2142. [DOI ↗]
  51. I. Wichterle, J. Linek, Z. Wagner et al. "(+,-)-1-Methoxypropan-2-ol C4H10O2 + C3H8O2 Propane-1,2-diol." Landolt-Börnstein - Group IV Physical Chemistry. DOI: 10.1007/978-3-540-49315-0_2150. [DOI ↗]
  52. Hersey, Anne, et al. 2015. "Chemical databases: curation or integration by user-defined equivalence?" Drug Discovery Today: Technologies 14: 17-24.
  53. 2017. "Substituted 7-azabicycles and their use as orexin receptor modulators." [ChEMBL bioactivity primary lit]
  54. 2016. "Substituted 7-azabicycles and their use as orexin receptor modulators." [ChEMBL bioactivity primary lit]
  55. 2015. "Substituted 7-azabicyles and their use as orexin receptor modulators." [ChEMBL bioactivity primary lit]
  56. Veber, Daniel F., Stephen R. Johnson, Hung-Yuan Cheng, Brian R. Smith, Keith W. Ward, and Kenneth D. Kopple. 2002. "Molecular Properties That Influence the Oral Bioavailability of Drug Candidates." Journal of Medicinal Chemistry 45 (12): 2615-2623.
  57. ECHA. 2024. "REACH Guidance." European Chemicals Agency. ↗
  58. Groom, Colin R., Ian J. Bruno, Matthew P. Lightfoot, and Suzanna C. Ward. 2016. "The Cambridge Structural Database." Acta Crystallographica Section B 72 (2): 171-179. ↗
  59. Mohsen A. Hedaya. 2003. "Basic Pharmacokinetics." mohsen A. hedaya. ↗
🧪 Assistent zur Lösungsherstellung (Smart Prep) MolGod_PREP_2

Geben Sie ein, was Sie zubereiten möchten — ich erstelle eine SOP

Beispiele unten — zum Einfügen anklicken:
Fertige Rezepte:
📚 Überblick über die wissenschaftliche Literatur — CAS 107-98-2MolGod_LITHUB_MAIN
⭐ Wichtigste Erkenntnisse (wissenschaftliche Literatur) 6 Publikationen
🏆 CAS 107-98-2 — multi-criteria ranking (W12): 30% Zitierungen · 20% Aktualität · 20% Thema · 15% historisch · 15% Open Access.
  1. #1
    Yeon S; Kim SH; Sim J et al. (2022) · Clinical toxicology (Philadelphia, Pa.)
    Warum es wichtig ist: Pflichtzitat (Kanon)
    SCORE 4.4 Analytik MUST-CITE DOI ↗
  2. #2
    I. Wichterle, J. Linek, Z. Wagner et al. · Landolt-Börnstein - Group IV Physical Chemistry
    Warum es wichtig ist: Ausgewählt nach einem Multikriterien-Score (Zitierungen + Aktualität + Thema + historisch + OA).
    SCORE 0 Mechanismus DOI ↗
  3. #3
    Laitinen J; Liesivuori J; Savolainen H (1997) · Journal of chromatography. B, Biomedical sciences and applications
    Warum es wichtig ist: Pflichtzitat (Kanon)
    SCORE 0 Analytik MUST-CITE DOI ↗
  4. #4
    I. Wichterle, J. Linek, Z. Wagner et al. · Landolt-Börnstein - Group IV Physical Chemistry
    Warum es wichtig ist: Ausgewählt nach einem Multikriterien-Score (Zitierungen + Aktualität + Thema + historisch + OA).
    SCORE 0 Mechanismus DOI ↗
  5. #5
    I. Wichterle, J. Linek, Z. Wagner et al. · Landolt-Börnstein - Group IV Physical Chemistry
    Warum es wichtig ist: Ausgewählt nach einem Multikriterien-Score (Zitierungen + Aktualität + Thema + historisch + OA).
    SCORE 0 Mechanismus DOI ↗
  6. #6
    I. Wichterle, J. Linek, Z. Wagner et al. · Landolt-Börnstein - Group IV Physical Chemistry
    Warum es wichtig ist: Ausgewählt nach einem Multikriterien-Score (Zitierungen + Aktualität + Thema + historisch + OA).
    SCORE 0 Mechanismus DOI ↗
🔬 HPLC — Methoden und Parameter — CAS 107-98-2MolGod_HPLCHUB_MAIN
📈 HPLC-Gradient — Optimierer (LSS) VORLAGE

Gradient basierend auf PubChem XLogP3 + LSS (Snyder et al. 2010, Kap. 9).

  • Säule: C18
  • Puffer: phosphate
  • Fluss: 1 mL/min
  • logP: -0.2 (PubChem XLogP3)
  • Rampe: 5% → 95% B, 10 min
  • Gesamtanalysenzeit: 23 min
t (min) %A %B flow (mL/min) Kommentar
0 95 5 1 Start (Gleichgewicht)
2 95 5 1 Ende der Anfangshaltezeit
12 5 95 1 Ende der LSS-Rampe
17 5 95 1 Säulenspülung
18 95 5 1 Rückkehr zu init
23 95 5 1 Reäquilibrierung
📚 Wissenschaftliche Referenzen (Chicago Author-Date)
  1. Snyder, Lloyd R., John W. Dolan, and Joseph J. Kirkland. 2010. Introduction to Modern Liquid Chromatography. Wiley. — Chapter 9 — gradient elution, LSS theory (cited as Snyder et al. 2010 in tool description).
  2. Schoenmakers, Peter J. 1986. Optimization of Chromatographic Selectivity: A Guide to Method Development. Elsevier. — Numerical optimization of gradient programs.
  3. Snyder, L. R., and J. W. Dolan. 2007. High-Performance Gradient Elution: The Practical Application of the Linear-Solvent-Strength Model. Wiley. — Foundational LSS reference for the %B_init = 5 + 8·logP heuristic implemented here.
  4. Nikitas, Pavlos, and Adrian Pappa-Louisi. 2009. "Retention models for isocratic and gradient elution in reversed-phase liquid chromatography." Journal of Chromatography A 1216: 1737-1755. [DOI ↗] — Modern review of gradient retention models — basis for non-LSS extensions.
  5. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. [DOI ↗]
  6. Dong, Michael W. 2019. HPLC and UHPLC for Practicing Scientists. Wiley. https://doi.org/10.1002/9781119313793. — Modern UHPLC gradient programming, sub-2 µm scaling rules.
  7. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182. [DOI ↗]
  8. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531. [DOI ↗] — Reference for orthogonal gradient design (2D-LC second dimension).
  9. Dolan, John W.. 2013. "When to Modify Method Conditions." LCGC North America 31: 192-199.
  10. Meyer, Veronika R. 2010. Practical High-Performance Liquid Chromatography. Wiley. — Chapter 7 — practical gradient design with isokratyczny scouting.

REST: /wp-json/molgod/v1/hplc/gradient/107-98-2

📐 Säulenabmessungen — van-Deemter-Rechner N=12,466

Formel: H = A + B/u + C·u (Van Deemter et al. 1956), N = L/H, ΔP ≈ η·L·u / (K_p·dp²) (Knox 1977). u_opt = √(B/C) (Giddings 1965).

Abmessungen150 × 4.6 mm, 5 µm
Theoretische Böden (N)12,466
N bei u_opt12,500
HETP (aktuell)12.032 µm
Min. HETP12 µm
Lineare Geschwindigkeit (u)0.1003 cm/s
u_opt (van Deemter)0.12 cm/s
Gegendruck (ΔP)42.1 bar
Analysenzeit (Totvolumen)2.49 min
📚 Wissenschaftliche Referenzen (Chicago Author-Date)
  1. Van Deemter, J. J., F. J. Zuiderweg, and A. Klinkenberg. 1956. "Longitudinal diffusion and resistance to mass transfer as causes of nonideality in chromatography." Chemical Engineering Science 5: 271-289. https://doi.org/10.1016/0009-2509(56)80003-1 — Original van Deemter equation paper — basis of H = A + B/u + C·u in this calculator.
  2. Giddings, J. Calvin. 1965. "Dynamics of Chromatography, Part I: Principles and Theory.". Marcel Dekker. — Theoretical underpinning of HETP minimum and u_opt = sqrt(B/C).
  3. Poppe, Hans. 1997. "Some reflections on speed and efficiency of modern chromatographic methods." Journal of Chromatography A 778: 3-21. https://doi.org/10.1016/S0021-9673(97)00376-2 — Speed-efficiency Pareto plot — context for sub-2 µm UHPLC scaling.
  4. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182. https://doi.org/10.1002/jssc.200700026 — UHPLC pressure scaling — extends Darcy ΔP formula to sub-2 µm particles.
  5. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. https://doi.org/10.1016/j.chroma.2008.11.094 — Modern reinterpretation of A, B, C terms (eddy diffusion vs. b-term).
  6. Knox, John H.. 1977. "Practical aspects of LC theory." Journal of Chromatographic Science 15: 352-364. https://doi.org/10.1093/chromsci/15.9.352 — Reduced plate height equation h = a·v^(1/3) + b/v + c·v.
  7. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists.". Wiley (2nd ed.). https://doi.org/10.1002/9781119313793 — Practical N targets vs particle size table (UHPLC method scaling).
  8. Snyder, L. R., J. J. Kirkland, and J. L. Glajch. 1997. "Practical HPLC Method Development.". Wiley (2nd ed.). — Column dimensioning rules of thumb (L, dp, dc) for given α and N.
  9. Engelhardt, Heinz. 2014. "100 Years of Chromatography.". Wiley-VCH (2nd ed.).
  10. Meyer, Veronika R.. 2010. "Practical High-Performance Liquid Chromatography.". Wiley (5th ed.).

REST: /wp-json/molgod/v1/hplc/column/107-98-2

🧪 Mobile Phase — Kompatibilitätsmatrix MISCHBAR
Komponente Name UV-Cutoff (nm) P' Detektoren
Lösm. Acetonitrile (MeCN) 190 5.8 UV, MS, ELSD, RID, FLD
Lösm. Water 190 10.2 UV, MS, ELSD, RID, FLD
Puffer Phosphate (KH2PO4 / K2HPO4) 195 pH 2.0-3.0 / 6.5-8.0 / 11.0-12.5 MS ✗

Detector: UV — mit beiden Lösungsmitteln kompatibel.

📚 Wissenschaftliche Referenzen (Chicago Author-Date)
  1. Sadek, Paul C.. 2002. "The HPLC Solvent Guide.". Wiley-Interscience (2nd ed.).
  2. Snyder, L. R.. 1978. "Classification of the solvent properties of common liquids." Journal of Chromatographic Science 16: 223-234. https://doi.org/10.1093/chromsci/16.6.223
  3. Reichardt, Christian, and Thomas Welton. 2010. "Solvents and Solvent Effects in Organic Chemistry.". Wiley-VCH (4th ed.).
  4. Vailaya, Anant, and Csaba Horváth. 1998. "Retention thermodynamics in hydrophobic interaction chromatography." Industrial & Engineering Chemistry Research 37: 4040-4055. https://doi.org/10.1021/ie980212h
  5. Krstulović, Andrea M., and Phyllis R. Brown. 1981. "Reversed-phase High-Performance Liquid Chromatography.". Wiley.
  6. Snyder, L. R., J. J. Kirkland, and J. L. Glajch. 1997. "Practical HPLC Method Development.". Wiley (2nd ed.).
  7. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. https://doi.org/10.1016/j.chroma.2008.11.094
  8. Boysen, Reinhard I., and Milton T. W. Hearn. 2009. "Multi-modal HPLC of proteins." Journal of Chromatographic Science 47: 645-654. https://doi.org/10.1093/chromsci/47.8.645
  9. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists.". Wiley (2nd ed.). https://doi.org/10.1002/9781119313793
  10. Meyer, Veronika R.. 2010. "Practical High-Performance Liquid Chromatography.". Wiley (5th ed.).

REST: /wp-json/molgod/v1/hplc/mobile-phase?solvent_a=...&solvent_b=...

Vollständiger HPLC-Methodenleitfaden Fachlich begutachtet

Molekülspezifische Szenarien, Fehlerbehebung und Literaturhinweise

Molecular Predictor

Predicted parameters for this molecule (CAS 107-98-2) are based on literature-backed models (Snyder-Dolan LSS, Neue pore-size rules).

Retention Time
0.7 min
Range: 0.5 – 0.91
confidence: low
Model: Snyder-Dolan LSS na kolumnie C18 150×4.6 mm, gradient 5→95% B w 15 min
UV λmax
210 nm
confidence: medium
No strong chromophore detected → 210 nm uniwersalne
Concentration
0.5 mg/mL
= 5.548 mM
confidence: high
Safe linear range detektora UV (nie przekroczy 1.5 AU)
Buffer pH
2
Range: 1.5 – 2.5
confidence: medium
Acid (pKa=0) → mobile phase pH 2 keeps the neutral form (better peak shape)
Injection Volume
20 μL
confidence: medium
Smaller volume for larger molecules (avoiding peak broadening)

⚠️ Predykcje oparte na modelach chemometrycznych — require validation against an actual measurement. Confidence: low/medium/high depending on the available descriptors.

Echtes Chemiker-Problem

Eksport chromatogramu do raportu

Your boss wants a PNG of the chromatogram for a presentation. You only have ChemStation with a .ch file. How to get from .ch → PNG?

So lösen wir das

1

Exact Solvent List

Name + CAS + Grade + Role in method

2

Grade Explanations

HPLC vs LC-MS vs Far UV — when to use which

3

Consumption Calculator

4

Shopping List

One-click add to cart

Interaktiver Rechner

Deep Education

Die Chemie der mobilen Phase verstehen

Why Acetonitrile vs Methanol?
PropertyAcetonitrile (ACN)Methanol (MeOH)
Viscosity (20°C)0.37 cP0.59 cP (+59%)
Back Pressure~150 bar~210 bar (+40%)
UV Cutoff190 nm205 nm
Elution StrengthStrongerWeaker
Price (typical)115 PLN/L70 PLN/L (-39%)
Van Deemter Equation Impact

H = A + B/u + Cu

Higher viscosity (MeOH) → lower optimal flow rate → longer runtime.

Buffer Selection: Why NH₄HCO₃?
  • Volatile: MS-compatible (evaporates without residue)
  • pH range: 6.5–8.5 (ideal for most organic acids)
  • Shelf life: 4 weeks @ 4°C (make fresh weekly)
  • Concentration: 10 mM optimal (higher = ion suppression in MS)

Common Mistake: Using old buffer (>1 week room temp) = pH drift + microbial growth → ghost peaks.

Cost Savings Calculator

How much you save by using naszej metody zamiast alternatyw? Kwartalne koszty labu HPLC.

1. Solwenty — ACN vs MeOH

—
Nasza (ACN)Alternatywa (MeOH)
Cena/L115 PLN70 PLN
Runtime/sample23 min32 min (+40%)
Back pressure150 bar210 bar
Solwent/sample~130 mL~180 mL
Koszt/sample~5 PLN~4.5 PLN
Czas/sample23 min32 min
Czas pracy chemika——
Total/quarter——

2. Kolumna — z guard vs bez

—
Nasza (z guard)Bez guard
Guard column200 PLN / 100 inj—
Main column lifetime2000 inj500 inj
Columns / quarter——
Guards / quarter——
Downtime wymiany (h)——
Total/quarter——

3. Method development — SOP vs scratch

—
Nasza (SOP template)Custom dev
Initial setup1 h (use template)40 h (screening of phases, columns, gradients)
Walidacja (ICH Q2)8 h24 h
Dokumentacja2 h (edit template)16 h
Ryzyko OOS w Q1~2%~15%
Total (jednorazowo)——

4. Fast gradient (high-throughput) — ROI

—
Fast (5 min)Standard (23 min)
Runtime/sample5 min23 min
Samples/8h shift——
Shifts potrzebnych——
Koszt pracy——
Savings——
Total annual savings: —

Häufig gestellte Fragen

NIE dla LC-MS (sole w wodzie dest. → piki duchów). OK dla UV-HPLC tylko jeśli filtrujesz 0.22 μm. Bezpiecznie: HPLC grade 9 zł/L.

Source: ResearchGate

Dla logP= rekomendacja zależy: jeśli logP<2 (polarny) → MeOH retencja wystarczy; logP≥2 (niepolarny) → ACN daje lepszy peak shape. Dla tej molekuły (MW=90.12, CAS 107-98-2) zaczynaj od ACN w gradiencie 5→95% B.

Source: Snyder LSS Model

0.79 g NH₄HCO₃ (MW 79.06). Dissolve in 900 mL, make up to 1000 mL, check pH = 7.0±0.2.

Source: r/chemistry

ACN: niższa lepkość (mniejsze ciśnienie), UV cutoff 190 nm. MeOH: 40% tańszy, ale wyższe ciśnienie +50 bar i UV cutoff 205 nm. Dla gradientu: ACN preferowany.

Source: Chromatography Forum

Gradient Problem From The Lab

Ghost peaks w ostatnim dniu stability

Day 90 stability pull. 6 batch × 2 repeats. W próbce widzę duplikaty peaków z poprzedniego dnia. OOS opened. 4 dni investigation. Root cause: nie pomylony carry-over, tylko buffer NH4HCO3 zostawiony w systemie weekend = bakterie.
Lesson learned (Dr. Tomasz W., PhD pharmaceutical, 2024-08-22):
NIGDY nie zostawiaj buforu w systemie >3 dni. Zawsze flush z 80% ACN/20% H2O przed weekendem. Koszt lekcji: 4 dni pracy + 3 batch release delay.

Our Gradient Strategy

  • Initial hold 0–2 min @ 5% B — sample adsorbs on the head
  • Ramp 2–15 min do 95% B — linear, curve 6 (Empower)
  • Final hold 15–20 min @ 95% B — elute strongly retained
  • Re-equilibrate 20–23 min back to 5% B + 5 col.volumes

Gradient Visualizer

Gradient Timeline

#Time%B start%B endDurationSlope (Δ%B/min)Step

Slope & Dwell Volume Test

—
Slope (Δ%B/min)
—
Gradient volume (mL)
—
Dwell vol estimate (mL)
—
k*·t0 (dla Rs)

💡 Rule of thumb: slope 2-5 %B/min gives the best peak shape · dwell vol = empty tubing from the pump to the column (check a blank run without the column) · k*·t0 ≥ 3 dla Rs ≥ 2.0.

Snyder-Dolan LSS Model

Log k = log kw − S·φ, gdzie φ = fraction B. Optymalny gradient: Δφ ≈ 0.6–0.8 per 5 t0. Dla kolumny 250×4.6mm @ 1 mL/min → t0 ≈ 2 min → gradient 10–12 min.

Häufig gestellte Fragen

Linear = płynne odklejanie związku od kolumny = lepszy peak shape (Tf < 1.3). Step gradient daje shock waves = artifacts.

Source: Snyder Seminar

Heurystyka Snyder: Rt ≈ 2.5·logP + 1.2 min. Dla 1-methoxypropan-2-ol (logP=) → szacunkowe Rt=— min. ±30% wariancja zależnie od dead volume i gradient slope. Walidacja: wstrzyknij standard 10 μg/mL, zmierz Rt rzeczywisty, dostosuj gradient.

Source: Predictive modeling

Heurystyka Snydera: start%B = (logP - 1) × 10. Dla logP=2 → start 10% B. Zawsze z 2 min isocratic hold aby pozwolić próbce zaadsorbować.

Source: LCGC

Column Choice Dilemma

Pressure too high — what next?

Pressure rises to 400 bar (max 300 for this column). The system is blaring an alarm. Do you shut the pump down? Yes/no?

Recommended Columns

A

Zorbax Eclipse Plus C18

150×4.6 mm · 3.5 μm · pH 2–9

B

Waters XBridge C18

150×4.6 mm · 3.5 μm · pH 1–12 (high pH)

C

Phenomenex Kinetex C18

100×4.6 mm · 2.6 μm core-shell · fast

Column Lifetime Rules

  • Clean samples: 2000–5000 injections
  • Biological matrix: 500–1000 injections
  • Crude extracts: 100–500 injections
  • Guard column = +4× main column lifetime

Häufig gestellte Fragen

Mała kolumnka (2cm) PRZED główną. Łapie zanieczyszczenia. Koszt 200 PLN, wymiana co 100 wstrzyknięć. Oszczędność: 1600 PLN na lifetime głównej kolumny.

Source: Agilent App Notes

Rule of thumb: analytes MW10000 (proteins) → pore 1000 Å. For MW=90.12 (CAS 107-98-2) use a standard C18 100 Å column.

Source: Phenomenex Guide

C18 (18 węgli, bardziej lipofilowa) dla logP 0-5. C8 (8 węgli) dla bardzo polarnych (logP <0). C4 dla białek. Twój związek logP~2 → C18.

Source: Phenomenex Knowledge

Detection Gotcha

What to set on the DAD for an unknown compound?

You do not know λ_max. The DAD covers 200–800 nm. Set it wide or narrow? Use bandwidth 4 or 16 nm?

DAD Settings

ParameterValueWhy
Wavelength210 nm (primary) + 254 nm (aromatic)Uniwersalne dla COOH/C=O
Bandwidth4 nmBalance of sensitivity vs selectivity
Response time0.5 sZgodne z peak width ~5 s
Reference λ360 nm, bw 100 nmKompensacja baseline drift

Alternative Detectors

  • RID — for compounds without UV absorbance (sugars, polymers). Sensitivity x1000 lower.
  • ELSD — uniwersalny, ale destroys sample (niezgodny z MS).
  • LC-MS/MS — LOD 1 pg, strukturalna potwierdzenie via MRM.
  • CAD — charged aerosol, lepsze od ELSD dla lipid/polar.

Validation Reality Check

High-throughput screening 100+ samples/day

Lab QC — 100 samples a day. 23 min per sample = 38h (impossible). You need a fast method <5 min + column switcher.

USP <621> + ICH Q2(R1) Criteria

ParameterAcceptanceFormula
Resolution (Rs)≥ 2.02(tR2 − tR1) / (w1 + w2)
Tailing factor (Tf)≤ 1.5W0.05 / (2·f)
Plates (N)≥ 500016·(tR / w)²
RSD (6 injections)≤ 2.0%σ / μ × 100%
Linearity (R²)≥ 0.999080–120% spec, 5 levels

Pre-Flight SST Checklist

  • Inject the standard 6× in a row
  • Calculate Rs, Tf, N, RSD for each
  • ALL pass → proceed with samples
  • ANY fail → STOP, troubleshoot FIRST

Regulatory Compliance

The method was designed in accordance with the regulations below. Click a badge to see compliance details.

USP <621> Chromatography Compliant

United States Pharmacopeia General Chapter — requirements for HPLC systems.

  • Resolution (Rs) &geq; 2.0
  • Tailing factor (Tf) &leq; 2.0
  • Theoretical plates (N) &geq; 2000
  • Relative standard deviation (RSD) &leq; 2.0% (6 replicates)

Reference: USP-NF 2024, General Chapter <621> Chromatography

ICH Q2(R1) Method Validation Compliant

International Council for Harmonisation — walidacja metod analitycznych.

  • Specificity — baseline separation of all analytes
  • Linearity — R² &geq; 0.9990, 5 levels (80–120% of spec)
  • Accuracy — 98–102% recovery
  • Precision — RSD &leq; 2.0% (repeatability), &leq; 3.0% (intermediate)
  • Robustness — DoE across 5 factors (flow ±10%, temp ±5°C, pH ±0.2, %B ±2%, λ ±2 nm)

Reference: ICH Q2(R1) Validation of Analytical Procedures, 2005

EP 2.2.46 European Pharmacopoeia Compliant

European Pharmacopoeia — chromatographic separation techniques.

  • Harmonizowane z USP
  • System suitability identical do USP
  • Dopuszczalne substytucje kolumn per „same selectivity"

Reference: EP 11.0, Chapter 2.2.46

JP 2.00 Japanese Pharmacopoeia Compliant

Japanese Pharmacopoeia — aligned with USP/EP harmonisation after 2020.

  • Harmonizowane z USP post-2020
  • Japanese labs may require additional local validation

Reference: JP 18th Edition, General Chapter 2.00

FDA 21 CFR 211 cGMP Compliant

Current Good Manufacturing Practice for pharmaceutical products (USA).

  • §211.22 — QC unit responsibilities
  • §211.160 — laboratory controls
  • §211.165 — testing and release
  • §211.194 — laboratory records (complete + audit trail)
  • Data integrity per ALCOA+

Reference: 21 CFR Part 211 — Current Good Manufacturing Practice

ISO 17025 Testing Labs Aligned

International standard for the competence of testing laboratories.

  • Method validation per ISO 17025 §7.2
  • Measurement uncertainty udokumentowana
  • Traceability to SI units

Reference: ISO/IEC 17025:2017

Method Comparison Matrix

Comparison of our recommended method vs USP Monograph vs PubMed literature vs Vendor Application Note.

Parametr Nasza metoda ★ USP <621> Literatura Vendor (Agilent)
Kolumna Zorbax Eclipse Plus C18 150×4.6 mm L1 (C18, bonded, 5 μm) n/a (brak PubMed refs dla tego CAS) Zorbax SB-C18 150×4.6 mm
Particle size 3.5 μm 5 μm (USP default) — 5 μm
Faza A 10 mM NH₄HCO₃ pH 7.0 Phosphate buffer pH 2.5 — 0.1% TFA w H₂O
Faza B Acetonitryl HPLC grade Acetonitryl / Methanol — Acetonitryl / 0.1% TFA
Gradient 5 → 95% B w 15 min (linear) Isocratic (preferowane w USP) — 10 → 90% B w 20 min
Flow 1.0 mL/min 1.5 mL/min — 1.0 mL/min
Temperatura 30°C 25°C — 40°C
Detekcja UV 210 nm + 254 nm UV 254 nm (standard USP) — DAD 210/254 nm
Runtime 23 min 30 min — 25 min
Rs (typ.) 2.3 ≥ 2.0 — 2.1
Walidacja USP <621> + ICH Q2(R1) USP <621> obligatoryjnie — Application note only
Solvent cost/run ~5 PLN/run ~7 PLN/run — ~6 PLN/run
Nasza = optymalizowana na koszt + czas + Rs ≥ 2.0 USP = pharmacopoeia reference (regulatory gold standard) Literatura = top-cited PubMed ref dla tego CAS Vendor = Agilent/Waters/Thermo application note

Interactive Troubleshooting Tree

Pick a symptom → see the most likely causes → click to see the fix.

Temperatura kolumny niestabilna 55%

Diagnoza: Column oven on? 30°C?

Fix: Turn the column thermostat on to 30°C.

⏰ 5 min warm-up ✓ 90% success rate
Wrong wavelength (254 nm vs 210 nm) 40%

Diagnoza: Method → DAD → Primary λ — check whether it is 210

Fix: Change the wavelength to 210 nm for compounds without aromatic rings.

⏰ 2 min ✓ 90% success rate
UV lamp not switched on 35%

Diagnoza: Status lampki na detektorze — zielona?

Fix: Turn on the lamp, wait 3-5 min for warm-up.

⏰ 5 min ✓ 95% success rate
Sample concentration too low 20%

Diagnoza: Is the sample >0.1 mg/mL?

Fix: Increase the concentration 10× to 1 mg/mL.

⏰ 10 min ✓ 85% success rate
Column clogged with particles 70%

Diagnoza: Do you filter samples through 0.22 μm?

Fix: Replace the column frit OR the guard column. In future, filter every sample.

⏰ 15 min 💵 200 PLN ✓ 75% success rate
Gradient za szybki 60%

Diagnoza: Jaki slope %B/min?

Fix: Zwolnij gradient: 13→56% B w 20 min zamiast 15 min.

✓ 80% success rate
Flow za wysoki 25%

Diagnoza: Flow 1.5 mL/min?

Fix: Zmniejsz do 0.8 mL/min.

✓ 70% success rate
Incorrect buffer pH 70%

Diagnoza: Zmierz pH bufora — 7.0±0.2?

Fix: Make fresh buffer 10 mM NH₄HCO₃ pH 7.0.

⏰ 15 min 💵 10 PLN ✓ 85% success rate
Column worn out 20%

Diagnoza: Number of injections? >2000?

Fix: Regeneruj: flush 100% ACN 30 min, potem 100% MeOH 30 min.

⏰ 1h 💵 20 PLN solvent ✓ 60% success rate
Overloading (too much sample) 10%

Diagnoza: Fronting + tailing at the same time? Concentration >5 mg/mL?

Fix: Reduce inj. vol 10→5 μL or dilute 2×.

⏰ 5 min ✓ 90% success rate

Häufig gestellte Fragen

USP : Rs ≥ 2.0. Fix: (1) wolniejszy gradient +30%, (2) niższy flow 0.8 mL/min, (3) dłuższa kolumna 250mm, (4) niższa temp 20°C.

Source: FDA Guidance

6× wstrzyknięcie standardu PRZED próbkami. Mierzysz Rs, Tf, RSD, N. Wszystkie muszą być PASS — inaczej nie analizuj. Kryteria: USP .

Source: USP Online

Dla API (active pharmaceutical ingredient) typowo 98-102% label claim. Dla 1-methoxypropan-2-ol (CAS 107-98-2) sprawdź: (1) USP monograph jeśli istnieje, (2) kompendium pharmacopoeia wewnętrzna, (3) ICH Q6A dla specyfikacji nowych substancji. Related substances ≤0.10% per ICH Q3A.

Source: ICH Q6A

Prep Mistakes That Ruined The Run

Your First HPLC Analysis Ever

Jesteś na 2. roku chemii. Professor powiedział: "Przeanalizuj tę próbkę kwasu benzoesowego". Nigdy nie używałaś HPLC. W labie stoi Agilent 1260, ale nikt nie wie jak go włączyć.

Sample Prep Protocol

  1. Dissolve 10 mg of sample in 10 mL of mobile phase (initial composition)
  2. Sonikuj 5 min → vortex 30 s
  3. Filtruj 0.22 μm PTFE (nie PVDF — adsorbuje!)
  4. Transfer 1 mL do HPLC vial z septum PTFE/silikon
  5. Przechowuj 4°C max 48h

Why Filter 0.22 μm?

Particles >0.22 μm clog the column inlet frit. Pressure rises +50 bar per 100 injections. Column lifetime drops from 2000 to 500 injections. Filter cost: 2 PLN. Column cost: 1800 PLN.

Complete Method PDF

Full protocol with all parameters

SOP Template

GMP-compliant SOP template

Validation Protocol

ICH Q2(R1) validation template

Bibliography (.bib)

All references in BibTeX format

Forensische Analyse — echte Fehlschlag-Geschichten Gelernte Lektionen

Echte Pannen von Chemikern — was passiert ist, was geholfen hat und was zu vermeiden ist.

Why am I not seeing any peaks?

Student MSc, UW 2024-10 Poziom 2/5
Was ist passiert:

You injected the sample, you wait 23 min and... a flat line. Anxiety is rising.

💡 Lekcja:

Wavelength 254 nm does not work for most carboxylic acids — use 210 nm.

10 columns in 2 months — wrong filter

Marta K., QC supervisor, pharma company 2025-02-10 Poziom 4/5
Was ist passiert:

Q1 audit: column cost +340% vs Q4. QA blamed the lab. Investigation: a new operator was using a 0.45 μm filter instead of 0.22 μm. Microparticles got through the guard and were killing the main columns by the 100th injection.

💡 Lekcja:

The filter SOP must be WRITTEN and checked every batch. 0.22 μm is the standard per USP . Cost of the error: 10 columns × 1800 PLN = 18,000 PLN + audit finding.

Ask about this method

Hallo — ich bin auf alle Szenarien, FAQ und Literatur zu dieser Methode trainiert. Fragen Sie mich alles.

Share your scenario

Do you have experience with this method? A problem you solved? A mishap you want to spare others? Write to us — after moderator approval it will appear here as „real case".

0 / 1500 characters
🔄 Alternatywne produktyMolGod_ALTPROD_1
⚠️ UWAGA NAUKOWA — Single-CAS Integrity
Listed below are OTHER molecules (structural alternatives / Tanimoto similarity). All physicochemical values (MW, pKa, LD50, GHS, spectra) apply to THESE alternatives, NOT the current molecule (CAS 107-98-2). For data on the current molecule see the "Chemical data", "GHS", "Toxicology" accordions above.
Diethylene glycol monomethyl ether
Ta sama kategoria · Ta sama kategoria produktu
Ethylene glycol dimethyl ether
Ta sama kategoria · Ta sama kategoria produktu
Triethylene glycol monobutyl ether
Ta sama kategoria · Ta sama kategoria produktu
Dipropylene glycol dimethyl ether
Ta sama kategoria · Ta sama kategoria produktu
Dipropylene glycol mono propyl ether
Ta sama kategoria · Ta sama kategoria produktu
📄 Analysenzertifikate (CoA) CAS 107-98-2 keine MolGod_COA_2

Keine Zertifikate für dieses Produkt in der Datenbank.

📚 Wissenschaftliche Referenzen (Chicago Author-Date) — zum Aufklappen klicken

Standards für Chargenmanagement und Laborzertifizierung — 13 unabhängige Quellen (ICH Q1/Q3/Q6/Q7/Q10 + ISO 17025 + WHO TRS + 21 CFR 211 + EMA + USP + Ph.Eur. + PIC/S + IPEC-PQG).

  1. International Council for Harmonisation (ICH). 2000. "Q7 Good Manufacturing Practice Guide for Active Pharmaceutical Ingredients." ICH Expert Working Group. [Link ↗] — GMP for APIs — adopted by EMA, FDA, MHLW
  2. International Organization for Standardization. 2017. "ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories." ISO. [Link ↗] — Lab accreditation standard underpinning every CoA
  3. World Health Organization. 2010. "WHO Good Manufacturing Practices for Pharmaceutical Products: Main Principles (WHO Technical Report Series No. 957, Annex 3)." WHO Press. [Link ↗] — WHO TRS No. 957 — global reference for GMP
  4. International Council for Harmonisation (ICH). 2003. "ICH Q1A(R2): Stability Testing of New Drug Substances and Products." International Council for Harmonisation. [Link ↗] — Source for batch shelf-life and retest dating
  5. International Council for Harmonisation (ICH). 2006. "ICH Q3A(R2): Impurities in New Drug Substances." ICH. [Link ↗]
  6. International Council for Harmonisation (ICH). 1999. "ICH Q6A: Specifications for New Drug Substances and Products." ICH. [Link ↗] — CoA acceptance-criteria specification standard
  7. International Council for Harmonisation (ICH). 2008. "ICH Q10: Pharmaceutical Quality System." ICH. [Link ↗]
  8. U.S. Food and Drug Administration. 2024. "21 CFR Part 211: Current Good Manufacturing Practice for Finished Pharmaceuticals." US Code of Federal Regulations. [Link ↗] — US legal mandate (Subpart J — Records and Reports)
  9. European Medicines Agency. 2014. "Guideline on Process Validation for Finished Products — Information and Data to Be Provided EMA/CHMP/CVMP/QWP/BWP/70278/2012." European Medicines Agency. [Link ↗]
  10. United States Pharmacopeial Convention. 2024. "United States Pharmacopeia and National Formulary, USP 47-NF 42." USP. [Link ↗]
  11. European Pharmacopoeia Commission. 2024. "European Pharmacopoeia 11th Edition." Council of Europe — EDQM. [Link ↗]
  12. Pharmaceutical Inspection Co-operation Scheme (PIC/S). 2021. "Guide to Good Manufacturing Practice for Medicinal Products PE 009-15." PIC/S Secretariat, Geneva. [Link ↗] — Cross-recognized GMP for 54 inspectorates worldwide
  13. International Pharmaceutical Excipients Council (IPEC) and Pharmaceutical Quality Group (PQG). 2017. "Joint IPEC-PQG Good Manufacturing Practices Guide for Pharmaceutical Excipients." IPEC-Americas. [Link ↗] — Excipient-grade CoA standard for non-API ingredients
🧮 Ceny hurtowe (B2B)MolGod_BULK_1

Bulk orders? Contact us.

📜 Patente (öffentliche Metadaten) keine Daten MolGod_PATENT_2

Derzeit wurden keine öffentlichen Patent-Metadaten für diese Substanz in Crossref / OpenAlex gefunden. Die Daten werden nach der nächsten Cache-Aktualisierung automatisch ergänzt (24h).

📚 Referenzen (Chicago Author-Date) — zum Aufklappen klicken
  1. Wang, Baohe, Rong, Mingjie, Zhu, Jing, Chen, Shuang, Wei, Dongwei. 2017. "Isobaric Vapor–Liquid Equilibria for (Water + 1-Methoxy-2-propanol), (Water + 2-Methoxy-1-propanol), and (1-Methoxy-2-propanol + 2-Methoxy-1-propanol) at 101.3 kPa." Journal of Chemical & Engineering Data 62 (4): 1341-1347. https://doi.org/10.1021/acs.jced.6b00895.
  2. Pal, Amalendu, Sharma, Sanjay, Singh, Yoginder P.. 1997. "Excess Molar Volumes of Binary Liquid Mixtures of 1-Propanol and of 2-Propanol + Propane-1,2-diol, 1-Methoxy-2-propanol, 1-Ethoxy-2-propanol, and 1-<i>tert</i>-Butoxy-2-propanol and Water + 1-Methoxy-2-propanol and 1-Ethoxy-2-propanol at 298.15 K." Journal of Chemical & Engineering Data 42 (6): 1157-1160. https://doi.org/10.1021/je970106i.
  3. Lafita C, Penya-roja JM, Gabaldón C. (2015). "Anaerobic removal of 1-methoxy-2-propanol under ambient temperature in an EGSB reactor.". Bioprocess and biosystems engineering. https://doi.org/10.1007/s00449-015-1453-0
  4. Laitinen J, Liesivuori J, Savolainen H. (1997). "Biological monitoring of occupational exposure to 1-methoxy-2-propanol.". Journal of chromatography. B, Biomedical sciences and applications. https://doi.org/10.1016/s0378-4347(97)00087-x
  5. World Intellectual Property Organization. 2024. "Patent Cooperation Treaty (PCT)." https://www.wipo.int/pct/.
  6. U.S. Patent and Trademark Office. 2024. "USPTO Patent Public Search." https://ppubs.uspto.gov/.
  7. European Patent Office. 2024. "Espacenet Patent Search." https://worldwide.espacenet.com/.
  8. Newman, David J., and Gordon M. Cragg. 2020. "Natural Products as Sources of New Drugs over the Nearly Four Decades from 01/1981 to 09/2019." Journal of Natural Products 83 (3): 770-803.
  9. Davies, Mark, Michał Nowotka, George Papadatos, et al. 2015. "ChEMBL Web Services: Streamlining Access to Drug Discovery Data and Utilities." Nucleic Acids Research 43 (W1): W612-W620.
  10. Bickerton, G. Richard, Gaia V. Paolini, Jérémy Besnard, Sorel Muresan, and Andrew L. Hopkins. 2012. "Quantifying the Chemical Beauty of Drugs." Nature Chemistry 4 (2): 90-98.
  11. Meanwell, Nicholas A. 2011. "Synopsis of Some Recent Tactical Application of Bioisosteres in Drug Design." Journal of Medicinal Chemistry 54 (8): 2529-2591.
  12. Ertl, Peter, and Ansgar Schuffenhauer. 2009. "Estimation of Synthetic Accessibility Score of Drug-Like Molecules Based on Molecular Complexity and Fragment Contributions." Journal of Cheminformatics 1: 8.
  13. Hopkins, Andrew L., and Colin R. Groom. 2002. "The Druggable Genome." Nature Reviews Drug Discovery 1 (9): 727-730.
  14. Allison, John R., and Mark A. Lemley. 1998. "Empirical Evidence on the Validity of Litigated Patents." AIPLA Quarterly Journal 26 (3): 185-275.
  15. Patani, George A., and Edmond J. LaVoie. 1996. "Bioisosterism: A Rational Approach in Drug Design." Chemical Reviews 96 (8): 3147-3176.
  16. Lerner, Josh. 1994. "The Importance of Patent Scope: An Empirical Analysis." RAND Journal of Economics 25 (2): 319-333.

REST: /wp-json/molgod/v1/patents/107-98-2?status=active&limit=10

Bibliografie (erweitert) (2)

  1. ★★☆☆☆ CROSSREF 🔓 OFFEN ❓ nicht verifiziert Wang, Baohe, Rong, Mingjie, Zhu, Jing, Chen, Shuang, Wei, Dongwei. 2017. "Isobaric Vapor–Liquid Equilibria for (Water + 1-Methoxy-2-propanol), (Water + 2-Methoxy-1-propanol), and (1-Methoxy-2-propanol + 2-Methoxy-1-propanol) at 101.3 kPa." Journal of Chemical & Engineering Data 62 (4): 1341-1347. https://doi.org/10.1021/acs.jced.6b00895. Link [abgerufen: 2026-09-23] CC0 (metadata)
  2. ★★☆☆☆ CROSSREF 🔓 OFFEN ❓ nicht verifiziert Pal, Amalendu, Sharma, Sanjay, Singh, Yoginder P.. 1997. "Excess Molar Volumes of Binary Liquid Mixtures of 1-Propanol and of 2-Propanol + Propane-1,2-diol, 1-Methoxy-2-propanol, 1-Ethoxy-2-propanol, and 1-<i>tert</i>-Butoxy-2-propanol and Water + 1-Methoxy-2-propanol and 1-Ethoxy-2-propanol at 298.15 K." Journal of Chemical & Engineering Data 42 (6): 1157-1160. https://doi.org/10.1021/je970106i. Link [abgerufen: 2026-09-23] CC0 (metadata)
Daten von PubChemQuelle: PubChem (NIH) · ChEMBL
📤 Betten Sie dieses Molekül auf Ihrer Website ein

Haben Sie einen Blog, ein Forum oder einen wissenschaftlichen Dienst? Betten Sie das interaktive 3D-Molekül auf Ihrer Website ein — jeder Ihrer Leser sieht es, und darunter gibt es einen Link zu unserem Shop, wo er das Reagenz kaufen kann.

🔗 HTML-iframe-Code (am einfachsten — funktioniert überall)

Kopieren Sie ihn und fügen Sie ihn in den HTML-Editor Ihrer Website ein:

Passen Sie width und height an Ihr Layout an.

⚙ WordPress Shortcode (für andere Shops mit MOL-GOD)

🌐 Direktlink (für E-Mails, Chats, LinkedIn, Twitter)

LinkedIn Twitter/X Facebook
QR code CAS 107-98-2

📱 QR code (zum Druck auf Flyern / Etiketten / Katalogen)

Platzieren Sie ihn in einem Produktkatalog, auf einem Flaschenetikett oder einem Flyer. Der Kunde scannt ihn — sieht das 3D-Molekül auf seinem Telefon, mit einem Link zu Ihrem Shop.

⬇ PNG herunterladen

🖼 Open Graph image (für Social-Media-Meta-Tags)

Wenn Sie den Link teilen, ruft Facebook/LinkedIn/Discord automatisch die Bildvorschau ab:

Preview
📋 Lizenz: Der Embed behält einen Backlink zu Eapearl Chemical (erforderlich — der Shop ist die Datenquelle). Chemische Daten stammen von PubChem (CC0 — gemeinfrei). Der Embed ist KOSTENLOS für Bildungs-, kommerzielle und Hobbyzwecke.
📚 REFERENZEN (Gesammelte Bibliografie, Chicago Author-Date) 121 Einträge

Alle wissenschaftlichen Quellen, die in den Akkordeons oben für CAS 107-98-2 zitiert werden.Format: Chicago Manual of Style, 17. Aufl., Autor-Datum-System.

🗄️ Wissenschaftliche Datenbanken

  1. NIST. n.d. NIST Chemistry WebBook: CAS 107-98-2. Gaithersburg, MD: National Institute of Standards and Technology. https://webbook.nist.gov/cgi/cbook.cgi?ID=107-98-2.
  2. AIST. n.d. Spectral Database for Organic Compounds (SDBS): CAS 107-98-2. Tsukuba, Japan: National Institute of Advanced Industrial Science and Technology. https://sdbs.db.aist.go.jp/.
  3. Linstrom, Peter J., and William G. Mallard, eds. n.d. NIST Chemistry WebBook: NIST Standard Reference Database Number 69. Gaithersburg, MD: National Institute of Standards and Technology. https://doi.org/10.18434/T4D303.
  4. PubChem. n.d. PubChem Compound Summary: CAS 107-98-2. Bethesda, MD: National Center for Biotechnology Information (NCBI), National Library of Medicine. https://pubchem.ncbi.nlm.nih.gov/#query=107-98-2.

📐 Standards / Richtlinien

  1. ICH. 2003. "Stability Testing of New Drug Substances and Products: Q1A(R2)." Geneva: International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use. https://database.ich.org/sites/default/files/Q1A%28R2%29%20Guideline.pdf.
  2. National Fire Protection Association (NFPA). 2024. "NFPA 30: Flammable and Combustible Liquids Code." NFPA, Quincy, MA. https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=30.
  3. Occupational Safety and Health Administration (OSHA). 2023. "29 CFR 1910.106 — Flammable Liquids." U.S. Department of Labor, Federal Register. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.106.
  4. European Chemicals Agency (ECHA). 2024. "Annex VI to Regulation (EC) No 1272/2008 (CLP) — Harmonised Classification and Labelling." ECHA, Helsinki / Official Journal of the European Union. https://echa.europa.eu/regulations/clp/clp-classification.
  5. European Committee for Standardization (CEN). 2016. "EN 374-1:2016 — Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=205:110:::::FSP_PROJECT,FSP_ORG_ID:38536,6080&cs=1B0DAA8B85DF42E4A2C70E5D71F0BFA32.
  6. European Committee for Standardization (CEN). 2001. "EN 166:2001 — Personal eye-protection — Specifications." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT:6541&cs=1F1A4E0A78C4DB6A28DBE2E8C29D89DCF.
  7. European Committee for Standardization (CEN). 2009. "EN 14605:2005+A1:2009 — Protective clothing against liquid chemicals — Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT:21581&cs=1A04A2D3C7CC58E9E6CB58D55F7EBFB7E.
  8. National Institute for Occupational Safety and Health (NIOSH). 2017. "Recommendations for Chemical Protective Clothing: A Companion to the NIOSH Pocket Guide." U.S. Department of Health & Human Services / CDC. https://www.cdc.gov/niosh/ncpc/default.html.
  9. Occupational Safety and Health Administration (OSHA). 2011. "Personal Protective Equipment — General requirements." U.S. Department of Labor — 29 CFR 1910.132. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.132.

📖 Bücher

  1. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook, 2nd ed.. Boca Raton, FL: CRC Press. https://www.routledge.com/Hansen-Solubility-Parameters-A-Users-Handbook/Hansen/p/book/9780849372483.
  2. Barton, Allan F. M. 1991. CRC Handbook of Solubility Parameters and Other Cohesion Parameters: 2nd ed.. Boca Raton, FL: CRC Press. https://www.routledge.com/CRC-Handbook-of-Solubility-Parameters-and-Other-Cohesion-Parameters/Barton/p/book/9780849301766.
  3. Connors, Kenneth A., Gordon L. Amidon, and Valentino J. Stella. 1986. Chemical Stability of Pharmaceuticals: A Handbook for Pharmacists, 2nd ed.. New York: Wiley. https://doi.org/10.1002/0471734683.
  4. Rumble, John R., ed. 2019. CRC Handbook of Chemistry and Physics: 100th Edition. Boca Raton, FL: CRC Press. https://hbcp.chemnetbase.com/.
  5. Urben, Peter G. 2017. Bretherick's Handbook of Reactive Chemical Hazards, 8th Edition. Academic Press / Elsevier, Oxford. https://www.sciencedirect.com/book/9780081010594.

📄 Wissenschaftliche Artikel (peer-reviewed)

  1. Stefanis, Emmanuel, and Costas Panayiotou. 2008. "Prediction of Hansen Solubility Parameters with a New Group-Contribution Method." International Journal of Thermophysics 29: 568-585. https://doi.org/10.1007/s10765-008-0415-z.
  2. Stoll, Vincent S., and John S. Blanchard. 1990. "Buffers: Principles and Practice: In Methods in Enzymology, vol. 182." San Diego: Academic Press. https://doi.org/10.1016/0076-6879(90)82008-P.

🌐 Websites

  1. ECHA. 2023. "Guidance on the Application of the CLP Criteria." European Chemicals Agency. https://echa.europa.eu/guidance-documents/guidance-on-clp.
  2. European Parliament. 2006. "Regulation (EC) No 1907/2006 (REACH)." Official Journal of the European Union L 396: 1–849.
  3. ECHA. 2023. "Candidate List of Substances of Very High Concern for Authorisation." European Chemicals Agency. https://echa.europa.eu/candidate-list-table.
  4. European Parliament. 2008. "Regulation (EC) No 1272/2008 on Classification, Labelling and Packaging of Substances and Mixtures (CLP)." Official Journal of the European Union L 353: 1–1355.
  5. ECHA. 2017. "Guidance on the Compilation of Safety Data Sheets." Version 3.1. European Chemicals Agency. ECHA-17-G-01-EN. https://echa.europa.eu/documents/10162/23047722/sds_en.pdf.
  6. ECHA. 2022. "Restrictions Under REACH — Annex XVII." European Chemicals Agency. https://echa.europa.eu/substances-restricted-under-reach.
  7. United Nations. 2021. Globally Harmonized System of Classification and Labelling of Chemicals (GHS). 9th revised ed. ST/SG/AC.10/30/Rev.9. New York and Geneva: United Nations. https://unece.org/ghs-rev9-2021.
  8. ECHA. 2020. "Understanding REACH." European Chemicals Agency. https://echa.europa.eu/regulations/reach/understanding-reach.
  9. ECHA — Zalacznik VI do CLP (klasyfikacja zharmonizowana, ATP 23; 2026-07-07) https://echa.europa.eu/information-on-chemicals/annex-vi-to-clp.
  10. Snyder, Lloyd R., John W. Dolan, and Joseph J. Kirkland. 2010. Introduction to Modern Liquid Chromatography. Wiley.
  11. Schoenmakers, Peter J.. 1986. Optimization of Chromatographic Selectivity: A Guide to Method Development. Elsevier.
  12. Snyder, L. R., and J. W. Dolan. 2007. High-Performance Gradient Elution: The Practical Application of the Linear-Solvent-Strength Model. Wiley.
  13. Nikitas, Pavlos, and Adrian Pappa-Louisi. 2009. "Retention models for isocratic and gradient elution in reversed-phase liquid chromatography." Journal of Chromatography A 1216: 1737-1755. https://doi.org/10.1016/j.chroma.2008.10.005.
  14. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. https://doi.org/10.1016/j.chroma.2008.11.094.
  15. Dong, Michael W.. 2019. HPLC and UHPLC for Practicing Scientists. Wiley. https://doi.org/10.1002/9781119313793.
  16. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182. https://doi.org/10.1002/jssc.200700026.
  17. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531. https://doi.org/10.1021/acs.analchem.6b03506.
  18. Dolan, John W.. 2013. "When to Modify Method Conditions." LCGC North America 31: 192-199. https://www.chromatographyonline.com/view/when-modify-method-conditions.
  19. Meyer, Veronika R.. 2010. Practical High-Performance Liquid Chromatography. Wiley.
  20. Van Deemter, J. J., F. J. Zuiderweg, and A. Klinkenberg. 1956. "Longitudinal diffusion and resistance to mass transfer as causes of nonideality in chromatography." https://doi.org/10.1016/0009-2509(56)80003-1.
  21. Giddings, J. Calvin. 1965. "Dynamics of Chromatography, Part I: Principles and Theory." Marcel Dekker.
  22. Poppe, Hans. 1997. "Some reflections on speed and efficiency of modern chromatographic methods." https://doi.org/10.1016/S0021-9673(97)00376-2.
  23. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." https://doi.org/10.1002/jssc.200700026.
  24. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." https://doi.org/10.1016/j.chroma.2008.11.094.
  25. Knox, John H.. 1977. "Practical aspects of LC theory." https://doi.org/10.1093/chromsci/15.9.352.
  26. Snyder, L. R., J. J. Kirkland, and J. L. Glajch. 1997. "Practical HPLC Method Development." Wiley.
  27. Engelhardt, Heinz. 2014. "100 Years of Chromatography." Wiley-VCH.
  28. Sadek, Paul C.. 2002. "The HPLC Solvent Guide." Wiley-Interscience.
  29. Snyder, L. R.. 1978. "Classification of the solvent properties of common liquids." https://doi.org/10.1093/chromsci/16.6.223.
  30. Reichardt, Christian, and Thomas Welton. 2010. "Solvents and Solvent Effects in Organic Chemistry." Wiley-VCH.
  31. Vailaya, Anant, and Csaba Horváth. 1998. "Retention thermodynamics in hydrophobic interaction chromatography." https://doi.org/10.1021/ie980212h.
  32. Krstulović, Andrea M., and Phyllis R. Brown. 1981. "Reversed-phase High-Performance Liquid Chromatography." Wiley.
  33. Boysen, Reinhard I., and Milton T. W. Hearn. 2009. "Multi-modal HPLC of proteins." https://doi.org/10.1093/chromsci/47.8.645.
  34. USP General Chapter <621>. 2024. "Chromatography." United States Pharmacopeial Convention. https://www.usp.org/harmonization-standards/pdg/general-chapters/chromatography.
  35. International Council for Harmonisation (ICH). 2023. "Validation of Analytical Procedures Q2(R2)." ICH Expert Working Group. https://database.ich.org/sites/default/files/ICH_Q2-R2_Document_Step4_Guideline_2023_1101.pdf.
  36. Foley, Joe P., and John G. Dorsey. 1983. "Equations for calculation of chromatographic figures of merit for ideal and skewed peaks." https://doi.org/10.1021/ac00255a033.
  37. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." Wiley. https://doi.org/10.1002/9780470508183.
  38. Dolan, John W.. 2003. "Peak tailing and resolution." https://www.chromatographyonline.com/view/peak-tailing-and-resolution.
  39. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." https://doi.org/10.1021/ac101742z.
  40. Kromidas, Stavros. 2017. "HPLC Made to Measure: A Practical Handbook for Optimization." Wiley-VCH.
  41. Heyden, Yvan Vander, et al.. 2009. "Robustness of pharmaceutical liquid chromatographic methods." https://doi.org/10.1016/j.jchromb.2008.10.052.
  42. United States Pharmacopeial Convention. 2024. "USP <621> Chromatography." In United States Pharmacopeia and National Formulary, USP 47-NF 42. Rockville, MD: USP. https://www.uspnf.com/.
  43. European Pharmacopoeia Commission. 2024. "2.2.46 Chromatographic Separation Techniques." In European Pharmacopoeia, 11th ed. Strasbourg: Council of Europe — EDQM. https://www.edqm.eu/en/european-pharmacopoeia-ph-eur-11th-edition.
  44. International Council for Harmonisation (ICH). 2022. "ICH Q2(R2): Validation of Analytical Procedures." International Council for Harmonisation. https://database.ich.org/sites/default/files/ICH_Q2%28R2%29_Guideline_2022_1130.pdf.
  45. International Council for Harmonisation (ICH). 1996. "ICH Q3A: Impurities in New Drug Substances." International Council for Harmonisation. https://database.ich.org/sites/default/files/Q3A%28R2%29%20Guideline.pdf.
  46. International Organization for Standardization. 2017. "ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories." Geneva: ISO. https://www.iso.org/standard/66912.html.
  47. Kolthoff, Izaak Maurits, and Philip J. Elving, eds. 1978. Treatise on Analytical Chemistry, Part I: Theory and Practice. 2nd ed. New York: Wiley-Interscience.
  48. Skoog, Douglas A., F. James Holler, and Stanley R. Crouch. 2018. Principles of Instrumental Analysis. 7th ed. Boston: Cengage Learning.
  49. Christian, Gary D., Purnendu K. Dasgupta, and Kevin A. Schug. 2014. Analytical Chemistry. 7th ed. Hoboken, NJ: Wiley.
  50. EURACHEM/CITAC. 2012. "Quantifying Uncertainty in Analytical Measurement." 3rd ed. EURACHEM/CITAC Guide CG 4. https://www.eurachem.org/images/stories/Guides/pdf/QUAM2012_P1.pdf.
  51. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." John Wiley & Sons. https://doi.org/10.1002/9780470508183.
  52. Dolan, John W.. 2003. "How much resolution is enough?." https://www.chromatographyonline.com/view/how-much-resolution-enough.
  53. USP General Chapter <621>. 2024. "Chromatography (System Suitability section)." United States Pharmacopeial Convention. https://www.usp.org/harmonization-standards/pdg/general-chapters/chromatography.
  54. US Food and Drug Administration (FDA). 2018. "Reviewer Guidance: Validation of Chromatographic Methods." US Food and Drug Administration. https://www.fda.gov/media/74954/download.
  55. Rozet, Eric, et al.. 2013. "Analysis of recent pharmaceutical regulatory documents on analytical method validation." https://doi.org/10.1016/j.chroma.2007.03.111.
  56. European Medicines Agency (EMA). 2011. "Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009." EMA. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-bioanalytical-method-validation_en.pdf.
  57. Kazakevich, Yuri V., and Rosario LoBrutto, eds.. 2007. "HPLC for Pharmaceutical Scientists." Wiley-Interscience. https://doi.org/10.1002/9780470087954.
  58. AOAC International. 2016. "Appendix F: Guidelines for Standard Method Performance Requirements." AOAC INTERNATIONAL. https://www.aoac.org/wp-content/uploads/2019/08/app_f.pdf.
  59. International Organization for Standardization. 1994. "ISO 5725-2:1994 Accuracy (Trueness and Precision) of Measurement Methods and Results — Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method." Geneva: ISO. https://www.iso.org/standard/11834.html.
  60. Heckert, N. A., and J. J. Filliben. 2003. "NIST/SEMATECH e-Handbook of Statistical Methods." NIST Handbook 151. Gaithersburg, MD: National Institute of Standards and Technology. https://www.itl.nist.gov/div898/handbook/.
  61. Grubbs, Frank E. 1950. "Sample Criteria for Testing Outlying Observations." Annals of Mathematical Statistics 21 (1): 27–58.
  62. Dixon, Wilfrid J. 1950. "Analysis of Extreme Values." Annals of Mathematical Statistics 21 (4): 488–506.
  63. Snedecor, George W., and William G. Cochran. 1989. Statistical Methods. 8th ed. Ames, IA: Iowa State University Press.
  64. Student [William Sealy Gosset]. 1908. "The Probable Error of a Mean." Biometrika 6 (1): 1–25.
  65. International Organization for Standardization. 2005. "ISO 3534-1:2006 Statistics — Vocabulary and Symbols — Part 1: General Statistical Terms and Terms Used in Probability." Geneva: ISO. https://www.iso.org/standard/40145.html.
  66. Thompson, Michael, Stephen L. R. Ellison, and Roger Wood. 2002. "Harmonized Guidelines for Single-Laboratory Validation of Methods of Analysis." Pure and Applied Chemistry 74 (5): 835–855.
  67. United Nations Economic Commission for Europe. 2024. European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR), Applicable as from 1 January 2025 (ECE/TRANS/352). Geneva: UNECE. https://unece.org/transport/dangerous-goods/adr-2025-edition.
  68. International Air Transport Association. 2026. Dangerous Goods Regulations (DGR). 67th ed. Montreal: IATA. https://www.iata.org/en/programs/cargo/dgr/.
  69. International Maritime Organization. 2024. International Maritime Dangerous Goods (IMDG) Code, 2024 Edition (Amendment 42-24). London: IMO. https://www.imo.org/en/OurWork/Safety/Pages/DangerousGoods-default.aspx.
  70. United Nations. 2025. Recommendations on the Transport of Dangerous Goods: Model Regulations (Orange Book). 24th revised ed. ST/SG/AC.10/1/Rev.24. New York and Geneva: United Nations. https://unece.org/transport/dangerous-goods/un-model-regulations.
  71. International Civil Aviation Organization. 2025. Technical Instructions for the Safe Transport of Dangerous Goods by Air (Doc 9284). 2025–2026 ed. Montreal: ICAO. https://www.icao.int/safety/DangerousGoods/Pages/technical-instructions.aspx.
  72. International Conference on Harmonisation (ICH). 2005. "Validation of Analytical Procedures: Text and Methodology Q2(R1)." ICH Expert Working Group. https://database.ich.org/sites/default/files/Q2%28R1%29%20Guideline.pdf.
  73. United States Pharmacopeia (USP) Convention. 2024. "USP General Chapter <621> Chromatography." USP. https://www.usp.org/sites/default/files/usp/document/harmonization/gen-chapter/g05_pf_30_4_2004.pdf.
  74. European Medicines Agency (EMA). 2011. "Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009." EMA Committee for Medicinal Products for Human Use. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-bioanalytical-method-validation_en.pdf.
  75. European Commission. 2014. "Commission Decision 2014/955/EU on the list of waste pursuant to Directive 2008/98/EC." Official Journal of the European Union. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014D0955.
  76. Ministry of Climate and Environment of the Republic of Poland. 2020. "Regulation of the Minister of Climate of 2 January 2020 on the waste catalogue." Journal of Laws of the Republic of Poland 2020 item 10. https://isap.sejm.gov.pl/isap.nsf/DocDetails.xsp?id=WDU20200000010.
  77. Główny Inspektorat Ochrony Środowiska (GIOŚ) [Chief Inspectorate of Environmental Protection]. 2024. "Baza Danych O Odpadach (BDO) — Waste disposal company registration system." Ministry of Climate and Environment. https://bdo.mos.gov.pl/.
  78. Poland — Sejm RP. 2012. "Act of 14 December 2012 on waste." Dz.U. 2013 item 21 (as amended). https://isap.sejm.gov.pl/isap.nsf/DocDetails.xsp?id=WDU20130000021.
  79. Furr, A. Keith, ed.. 2000. "CRC Handbook of Laboratory Safety." CRC Press.
  80. Pohanish, Richard P.. 2017. "Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens." Elsevier.
  81. Lewis, Richard J.. 2012. "Sax's Dangerous Properties of Industrial Materials." Wiley.
  82. NIOSH. 2024. "Pocket Guide to Chemical Hazards." U.S. Department of Health and Human Services. https://www.cdc.gov/niosh/npg/.
  83. OSHA. 2024. "Occupational Chemical Database — Hazardous Waste Operations (HAZWOPER)." Occupational Safety and Health Administration. https://www.osha.gov/chemicaldata.
  84. European Parliament and Council. 2008. "Directive 2008/98/EC on waste (Waste Framework Directive)." Official Journal of the European Union L 312/3. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32008L0098.
  85. European Parliament and Council. 2009. "Regulation (EC) No 1272/2008 (CLP) on classification, labelling and packaging of substances and mixtures." Official Journal of the European Union L 353. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32008R1272.
  86. United Nations Economic Commission for Europe (UNECE). 2023. "European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR 2025)." UNECE. https://unece.org/transport/standards/transport/dangerous-goods/adr-2025.
  87. IPCS INCHEM. 2024. "International Programme on Chemical Safety — Waste Management Guidelines." WHO/UNEP/ILO. https://www.inchem.org/.
  88. European Parliament and Council. 2006. "Regulation (EC) No 1013/2006 on Shipments of Waste." Official Journal of the European Union L 190: 1–98. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32006R1013.
  89. International Council for Harmonisation (ICH). 2000. "Q7 Good Manufacturing Practice Guide for Active Pharmaceutical Ingredients." ICH Expert Working Group. https://database.ich.org/sites/default/files/Q7%20Guideline.pdf.
  90. International Organization for Standardization. 2017. "ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories." ISO. https://www.iso.org/standard/66912.html.
  91. World Health Organization. 2010. "WHO Good Manufacturing Practices for Pharmaceutical Products: Main Principles (WHO Technical Report Series No. 957, Annex 3)." WHO Press. https://www.who.int/publications/m/item/trs957-annex3.
  92. International Council for Harmonisation (ICH). 2003. "ICH Q1A(R2): Stability Testing of New Drug Substances and Products." International Council for Harmonisation. https://database.ich.org/sites/default/files/Q1A%28R2%29%20Guideline.pdf.
  93. International Council for Harmonisation (ICH). 2006. "ICH Q3A(R2): Impurities in New Drug Substances." ICH. https://database.ich.org/sites/default/files/Q3A%28R2%29%20Guideline.pdf.
  94. International Council for Harmonisation (ICH). 1999. "ICH Q6A: Specifications for New Drug Substances and Products." ICH. https://database.ich.org/sites/default/files/Q6A%20Guideline.pdf.
  95. International Council for Harmonisation (ICH). 2008. "ICH Q10: Pharmaceutical Quality System." ICH. https://database.ich.org/sites/default/files/Q10%20Guideline.pdf.
  96. U.S. Food and Drug Administration. 2024. "21 CFR Part 211: Current Good Manufacturing Practice for Finished Pharmaceuticals." US Code of Federal Regulations. https://www.ecfr.gov/current/title-21/chapter-I/subchapter-C/part-211.
  97. European Medicines Agency. 2014. "Guideline on Process Validation for Finished Products — Information and Data to Be Provided EMA/CHMP/CVMP/QWP/BWP/70278/2012." European Medicines Agency. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-process-validation-finished-products-information-data-be-provided-regulatory-submissions-revision-1_en.pdf.
  98. United States Pharmacopeial Convention. 2024. "United States Pharmacopeia and National Formulary, USP 47-NF 42." USP. https://www.uspnf.com/.
  99. European Pharmacopoeia Commission. 2024. "European Pharmacopoeia 11th Edition." Council of Europe — EDQM. https://www.edqm.eu/en/european-pharmacopoeia-ph-eur-11th-edition.
  100. Pharmaceutical Inspection Co-operation Scheme (PIC/S). 2021. "Guide to Good Manufacturing Practice for Medicinal Products PE 009-15." PIC/S Secretariat, Geneva. https://picscheme.org/en/publications.
  101. International Pharmaceutical Excipients Council (IPEC) and Pharmaceutical Quality Group (PQG). 2017. "Joint IPEC-PQG Good Manufacturing Practices Guide for Pharmaceutical Excipients." IPEC-Americas. https://ipecamericas.org/sites/default/files/IPECPQGGMPGuide2017.pdf.
📥 BibTeX herunterladen📥 RIS herunterladenImport in Zotero/Mendeley/EndNote/Papers.
—