Does BMA mean n-butyl methacrylate or isobutyl methacrylate?

In most commercial usage the bare abbreviation means the normal isomer, n-butyl methacrylate, CAS 97-88-1. The branched isomer, isobutyl methacrylate, is a different substance with its own identifiers and a different contribution to copolymer hardness, and the tertiary isomer is different again. Because all three are abbreviated loosely in day-to-day correspondence, an order written as BMA alone is ambiguous. Write the full chemical name and the CAS number on every enquiry, purchase order and goods-inwards record.

Why must the monomer not be blanketed with pure nitrogen?

Because the stabiliser used in commercial methacrylate monomers requires dissolved oxygen to function. It intercepts radicals by a mechanism that consumes oxygen, so a drum stripped of oxygen contains an inhibitor that is chemically present and functionally absent. The correct headspace is air, or air diluted with nitrogen to a specified oxygen content, never an inert blanket. This is one of the very few cases in a chemical store where displacing oxygen makes a material more dangerous rather than less, and it catches people whose instinct is trained on flammable solvents.

How should inhibitor content be read on a certificate?

As a starting condition rather than a permanent property. The certificate reports the inhibitor level at release; that level falls in storage as the stabiliser does its job, and it falls faster in warm conditions, in light and in the presence of contamination. A long-stored drum can meet its original certificate on every other line while having very little inhibitor left. Where storage has been long or uncertain, retest the inhibitor level before charging a reactor rather than relying on the release figure.

What is popcorn polymerisation and why does it matter here?

It is a self-propagating, expanding polymer growth that forms in dead legs, vapour spaces, valve bonnets and residues where inhibitor cannot reach. Once seeded it continues under conditions that would not start a normal polymerisation, and it grows mechanically enough to jam valves and distort equipment. The controls are housekeeping controls: no unswept dead legs, no long-standing residues, no lines left full between campaigns, and clean vessels before refilling. It is not a reason to avoid methacrylate monomers, but it is a reason to design the pipework as if the monomer were reactive, because it is.

How does the butyl ester change a copolymer compared with the methyl one?

The four-carbon ester side chain is flexible and bulky, so it loosens chain packing and lowers the temperature at which the polymer softens. Against the methyl ester it gives a softer, more flexible and more extensible polymer, better adhesion and easier film formation, at the cost of hardness and block resistance. Against the corresponding acrylate it gives a harder polymer with the weathering advantage of the methacrylate backbone. Formulators use it as the soft component of an all-methacrylate system, which keeps the durability while tuning flexibility.

Qu'est-ce que Acide L-tartrique ?

Acide L-tartrique est un composé chimique enregistré sous le numéro CAS 87-69-4. Formule brute: C4H6O6. Masse molaire: 150.09 g/mol. IUPAC: (2R,3R)-2,3-dihydroxybutanedioic acid.

Quel est le numéro CAS de Acide L-tartrique ?

Le numéro CAS de Acide L-tartrique est 87-69-4 — un identifiant unique du Chemical Abstracts Service (CAS).

Quelle est la formule brute de Acide L-tartrique ?

Formule brute: C4H6O6. Masse molaire: 150.09 g/mol. logP (XLogP3): -1.9. PSA: 115 Å².

Où acheter Acide L-tartrique ?

Acide L-tartrique est disponible dans notre boutique. Voir le produit : https://epchems.online/products/l-tartaric-acid/

D'où proviennent les données chimiques de Acide L-tartrique ?

Les données chimiques de Acide L-tartrique proviennent de sources faisant autorité : PubChem (NIH). PubChem CID: 444305. Conformes au règlement CLP (CE 1272/2008), disponibles sous licence CC-BY 4.0.

Acide L-tartrique

L-Tartaric acid

CAS 87-69-4 · C₄H₆O₆ · MW 150.09 g/mol

À propos de Acide L-tartrique

Acide L-tartrique est un composé chimique enregistré sous le numéro CAS 87-69-4, de formule brute C₄H₆O₆, et de masse molaire 150.09 g/mol.

La molécule contient 16 atomes reliés par 15 liaisons chimiques. Le nom systématique IUPAC complet de ce composé est (2R,3R)-2,3-dihydroxybutanedioic acid. Le modèle 3D interactif ci-dessus permet de visualiser l'arrangement spatial des atomes — vous pouvez le faire pivoter à la souris, zoomer avec la molette et basculer entre les modes de visualisation squelette / Ball & Stick / Space Fill.

Du point de vue des propriétés physico-chimiques, le coefficient de partage logP = -1.9 (valeur négative, composé hydrophile), surface polaire PSA = 115 Å², 4 donneurs et 6 accepteurs de liaisons hydrogène. Ces paramètres sont essentiels pour évaluer la biodisponibilité et l'interaction avec les biomolécules.

Les données chimiques de ce composé proviennent de PubChem (NIH NLM NCBI), l'une des plus grandes bases de données chimiques au monde. Toutes les informations sont mises à jour automatiquement et enrichies de traductions des mentions de danger GHS conformes au règlement CLP (CE 1272/2008). Le widget ci-dessus peut être utilisé à des fins éducatives, de recherche et commerciales.

Propriétés physico-chimiques

Wzór sumaryczny	C₄H₆O₆
Masa molowa	150.09 g/mol
IUPAC	(2R,3R)-2,3-dihydroxybutanedioic acid
SMILES	`[C@@H]([C@H](C(=O)O)O)(C(=O)O)O`
InChIKey	`FEWJPZIEWOKRBE-JCYAYHJZSA-N`
logP (XLogP3)	-1.9
PSA	115 Å²
HBD / HBA	4 / 6
PubChem CID	CID 444305 ↗

Sécurité GHS

Sygnał: Niebezpieczeństwo

GHS05

GHS07

Littérature scientifique

Literatura naukowa

5 artykułów · 0 open access · Źródła: PubMed, OpenAlex, Semantic Scholar

📈 Timeline publikacji (5 artykułów)

Wysokość słupka = liczba artykułów w roku. Hover dla szczegółów.

Study of the diastereoisomers formed between (N-alkyl)-pipecolic acid-anilides and 2R,3R-tartaric acid or O,O′-dibenzoyl-2R,3R-tartaric acid. Do the tartaric acids form molecular-complexes, instead of salts during optical resolutions?

Katalin Nemák, Mária Acs, Zsuzsa M. Jászay et al. (1996) · Tetrahedron

Cytowania: 32$ PaywallDOI ↗

Optical resolution of racemic alcohols by diastereoisomeric complex formation with O,O′-dibenzoyl-(2R,3R)-tartaric acid; the crystal structure of the (–)-(1R,2S,5R)-menthol·O,O′-dibenzoyl-(2R,3R)-tartaric acid complex

Dávid Kozma, Zsolt Böcskei, Csaba Kassai et al. (1996) · Chem. Commun.

Cytowania: 12$ PaywallDOI ↗

SYNTHESIS OF (2R,3R) 0,0-DIPIVALOYLTARTARIC ACID (<i>DPTA</i>) AND OF (2R,3R) 0,0-DI(ADAMANTANE-1 CARBONYL) TARTARIC ACID (<i>DATA</i>), USEFUL CHIRAL REAGENTS FOR ASYMMETRIC PROTONATIONS

L. Duhamel, J. C. Plaquevent (1982) · Organic Preparations and Procedures International

Cytowania: 9$ PaywallDOI ↗

ChemInform Abstract: SYNTHESIS OF (2R,3R)‐O,O‐DIPIVALOYLTARTARIC ACID (DPTA) AND OF (2R,3R)‐O,O‐BIS(ADAMANTANE‐1‐CARBONYL)TARTARIC ACID (DATA), USEFUL CHIRAL REAGENTS FOR ASYMMETRIC PROTONATIONS

L. DUHAMEL, J. C. PLAQUEVENT (1983) · Chemischer Informationsdienst

$ PaywallDOI ↗

ChemInform Abstract: Study of the Diastereoisomers Formed Between (N‐Alkyl)‐pipecolic Acid Anilides and 2R,3R‐Tartaric Acid of O,O′‐Dibenzoyl‐2R,3R‐tartaric Acid. Do the Tartaric Acid Form Molecular Complexes Instead of Salts During Optical Resolutions?

K. NEMAK, M. ACS, Z. M. JASZAY et al. (1996) · ChemInform

$ PaywallDOI ↗

Dane z PubMed (NIH NLM), OpenAlex (CC0), Semantic Scholar (AI2). AI Summary wygenerowane przez Semantic Scholar TLDR. Artykuły z ikoną wymagają płatnego dostępu.

Synonymes

L-tartaric acid · 87-69-4 · L-(+)-Tartaric acid · L(+)-Tartaric acid · tartaric acid · (2R,3R)-2,3-dihydroxysuccinic acid · (2R,3R)-2,3-dihydroxybutanedioic acid · (+)-Tartaric acid · (+)-L-Tartaric acid · (R,R)-Tartaric acid · Threaric acid · Dextrotartaric acid · L-threaric acid · Natural tartaric acid · (+)-(R,R)-Tartaric acid

Sources des données

📊 PubChem CID 444305 — NIH
🔬 NIST WebBook — spektroskopia
🌐 Wikidata
💊 ChEMBL — bioaktywność

Acheter en boutique

L (+)-Tartaric acid →

Molécules apparentées

Diethylene glycol monohexyl ether CAS 112-59-4 · C10H22O3 Diethylene glycol monobutyl ether CAS 112-34-5 · C8H18O3 L-Alanine CAS 56-41-7 · C3H7NO2 Benzoic acid CAS 65-85-0 · C7H6O2 Sodium carbonate CAS 497-19-8 · CNa₂O₃ Glycidyl methacrylate CAS 106-91-2 · C7H10O3