Does BMA mean n-butyl methacrylate or isobutyl methacrylate?

In most commercial usage the bare abbreviation means the normal isomer, n-butyl methacrylate, CAS 97-88-1. The branched isomer, isobutyl methacrylate, is a different substance with its own identifiers and a different contribution to copolymer hardness, and the tertiary isomer is different again. Because all three are abbreviated loosely in day-to-day correspondence, an order written as BMA alone is ambiguous. Write the full chemical name and the CAS number on every enquiry, purchase order and goods-inwards record.

Why must the monomer not be blanketed with pure nitrogen?

Because the stabiliser used in commercial methacrylate monomers requires dissolved oxygen to function. It intercepts radicals by a mechanism that consumes oxygen, so a drum stripped of oxygen contains an inhibitor that is chemically present and functionally absent. The correct headspace is air, or air diluted with nitrogen to a specified oxygen content, never an inert blanket. This is one of the very few cases in a chemical store where displacing oxygen makes a material more dangerous rather than less, and it catches people whose instinct is trained on flammable solvents.

How should inhibitor content be read on a certificate?

As a starting condition rather than a permanent property. The certificate reports the inhibitor level at release; that level falls in storage as the stabiliser does its job, and it falls faster in warm conditions, in light and in the presence of contamination. A long-stored drum can meet its original certificate on every other line while having very little inhibitor left. Where storage has been long or uncertain, retest the inhibitor level before charging a reactor rather than relying on the release figure.

What is popcorn polymerisation and why does it matter here?

It is a self-propagating, expanding polymer growth that forms in dead legs, vapour spaces, valve bonnets and residues where inhibitor cannot reach. Once seeded it continues under conditions that would not start a normal polymerisation, and it grows mechanically enough to jam valves and distort equipment. The controls are housekeeping controls: no unswept dead legs, no long-standing residues, no lines left full between campaigns, and clean vessels before refilling. It is not a reason to avoid methacrylate monomers, but it is a reason to design the pipework as if the monomer were reactive, because it is.

How does the butyl ester change a copolymer compared with the methyl one?

The four-carbon ester side chain is flexible and bulky, so it loosens chain packing and lowers the temperature at which the polymer softens. Against the methyl ester it gives a softer, more flexible and more extensible polymer, better adhesion and easier film formation, at the cost of hardness and block resistance. Against the corresponding acrylate it gives a harder polymer with the weathering advantage of the methacrylate backbone. Formulators use it as the soft component of an all-methacrylate system, which keeps the durability while tuning flexibility.

Glycerol is a chemical compound registered under CAS number 56-81-5. Molecular formula: C3H8O3. Molar mass: 92.09 g/mol. IUPAC: propane-1,2,3-triol.

What is the CAS number of Glycerol?

The CAS number of Glycerol is 56-81-5 — a unique Chemical Abstracts Service (CAS) identifier.

What is the molecular formula of Glycerol?

Molecular formula: C3H8O3. Molar mass: 92.09 g/mol. logP (XLogP3): -1.8. PSA: 60.7 Å².

Where can I buy Glycerol?

Glycerol is available in our shop. View the product: https://epchems.online/products/glycerol/

Where does the chemical data for Glycerol come from?

Chemical data for Glycerol comes from authoritative sources: PubChem (NIH), ChEMBL (EBI). PubChem CID: 753. Compliant with the CLP Regulation (EC 1272/2008), available under the CC-BY 4.0 licence.

Glycerol

CAS 56-81-5 · C₃H₈O₃ · MW 92.09 g/mol

About Glycerol

Glycerol is a chemical compound registered under number CAS 56-81-5, with the molecular formula C₃H₈O₃, and a molar mass of 92.09 g/mol.

The molecule contains 14 atoms connected by 13 chemical bonds. The full systematic IUPAC name of this compound is propane-1,2,3-triol. The interactive 3D model above lets you view the spatial arrangement of the atoms — you can rotate it with the mouse, zoom with the scroll wheel, and switch between skeletal / Ball & Stick / Space Fill visualization modes.

In terms of physicochemical properties, the partition coefficient logP = -1.8 (negative value, a hydrophilic compound), polar surface area PSA = 60.7 Å², 3 donors and 3 hydrogen bond acceptors. These parameters are key when assessing bioavailability and interaction with biomolecules.

Chemical data for this compound comes from PubChem (NIH NLM NCBI), one of the world's largest chemical databases. All information is updated automatically and enriched with GHS hazard statement translations compliant with the CLP Regulation (EC 1272/2008). The widget above may be used for educational, research and commercial purposes.

Physicochemical properties

Wzór sumaryczny	C₃H₈O₃
Masa molowa	92.09 g/mol
IUPAC	propane-1,2,3-triol
SMILES	`C(C(CO)O)O`
InChIKey	`PEDCQBHIVMGVHV-UHFFFAOYSA-N`
logP (XLogP3)	-1.8
PSA	60.7 Å²
HBD / HBA	3 / 3
PubChem CID	CID 753 ↗

Scientific literature

Literatura naukowa

1 artykułów · 1 open access · Źródła: PubMed, OpenAlex, Semantic Scholar

🔓

Re‐evaluation of glycerol (E 422) as a food additive

EFSA Panel on Food Additives and Nutrient Sources added to Food (ANS), Alicja Mortensen, Fernando Aguilar et al. (2017) · EFSA Journal

Cytowania: 38Open AccessDOI ↗PDF ↗

Dane z PubMed (NIH NLM), OpenAlex (CC0), Semantic Scholar (AI2). AI Summary wygenerowane przez Semantic Scholar TLDR. Artykuły z ikoną wymagają płatnego dostępu.

Synonyms

glycerol · glycerin · 56-81-5 · Glycerine · 1,2,3-Propanetriol · Glycyl alcohol · Trihydroxypropane · Glyceritol · Osmoglyn · 1,2,3-trihydroxypropane · Glyrol · Glysanin · Grocolene · Ophthalgan · Glycerinum

Data sources

📊 PubChem CID 753 — NIH
🔬 NIST WebBook — spektroskopia
🌐 Wikidata
💊 ChEMBL — bioaktywność

Buy in the shop

Glycerol →

Related molecules

Sodium bicarbonate CAS 144-55-8 · CHNaO3 1,2-Propylene Diacetate (PGDA) CAS 623-84-7 · C7H12O4 L-Serine CAS 56-45-1 · C3H7NO3 Glycidyl methacrylate CAS 106-91-2 · C7H10O3 Citric acid monohydrate CAS 77-92-9 · C6H8O7 Hydrochloric acid CAS 7647-01-0 · ClH