Does BMA mean n-butyl methacrylate or isobutyl methacrylate?

In most commercial usage the bare abbreviation means the normal isomer, n-butyl methacrylate, CAS 97-88-1. The branched isomer, isobutyl methacrylate, is a different substance with its own identifiers and a different contribution to copolymer hardness, and the tertiary isomer is different again. Because all three are abbreviated loosely in day-to-day correspondence, an order written as BMA alone is ambiguous. Write the full chemical name and the CAS number on every enquiry, purchase order and goods-inwards record.

Why must the monomer not be blanketed with pure nitrogen?

Because the stabiliser used in commercial methacrylate monomers requires dissolved oxygen to function. It intercepts radicals by a mechanism that consumes oxygen, so a drum stripped of oxygen contains an inhibitor that is chemically present and functionally absent. The correct headspace is air, or air diluted with nitrogen to a specified oxygen content, never an inert blanket. This is one of the very few cases in a chemical store where displacing oxygen makes a material more dangerous rather than less, and it catches people whose instinct is trained on flammable solvents.

How should inhibitor content be read on a certificate?

As a starting condition rather than a permanent property. The certificate reports the inhibitor level at release; that level falls in storage as the stabiliser does its job, and it falls faster in warm conditions, in light and in the presence of contamination. A long-stored drum can meet its original certificate on every other line while having very little inhibitor left. Where storage has been long or uncertain, retest the inhibitor level before charging a reactor rather than relying on the release figure.

What is popcorn polymerisation and why does it matter here?

It is a self-propagating, expanding polymer growth that forms in dead legs, vapour spaces, valve bonnets and residues where inhibitor cannot reach. Once seeded it continues under conditions that would not start a normal polymerisation, and it grows mechanically enough to jam valves and distort equipment. The controls are housekeeping controls: no unswept dead legs, no long-standing residues, no lines left full between campaigns, and clean vessels before refilling. It is not a reason to avoid methacrylate monomers, but it is a reason to design the pipework as if the monomer were reactive, because it is.

How does the butyl ester change a copolymer compared with the methyl one?

The four-carbon ester side chain is flexible and bulky, so it loosens chain packing and lowers the temperature at which the polymer softens. Against the methyl ester it gives a softer, more flexible and more extensible polymer, better adhesion and easier film formation, at the cost of hardness and block resistance. Against the corresponding acrylate it gives a harder polymer with the weathering advantage of the methacrylate backbone. Formulators use it as the soft component of an all-methacrylate system, which keeps the durability while tuning flexibility.

Qu'est-ce que Dipropylene glycol mono propyl ether ?

Dipropylene glycol mono propyl ether est un composé chimique enregistré sous le numéro CAS 35884-42-5. Formule brute: C10H22O3. Masse molaire: 190.28 g/mol. IUPAC: 1-(3-butoxypropoxy)propan-1-ol.

Quel est le numéro CAS de Dipropylene glycol mono propyl ether ?

Le numéro CAS de Dipropylene glycol mono propyl ether est 35884-42-5 — un identifiant unique du Chemical Abstracts Service (CAS).

Quelle est la formule brute de Dipropylene glycol mono propyl ether ?

Formule brute: C10H22O3. Masse molaire: 190.28 g/mol. logP (XLogP3): 1.9. PSA: 38.7 Å².

Où acheter Dipropylene glycol mono propyl ether ?

Dipropylene glycol mono propyl ether est disponible dans notre boutique. Voir le produit : https://epchems.online/products/dipropylene-glycol-mono-propyl-ether/

D'où proviennent les données chimiques de Dipropylene glycol mono propyl ether ?

Les données chimiques de Dipropylene glycol mono propyl ether proviennent de sources faisant autorité : PubChem (NIH). PubChem CID: 3015813. Conformes au règlement CLP (CE 1272/2008), disponibles sous licence CC-BY 4.0.

Dipropylene glycol mono propyl ether

Propanol, 1(or 2)-(2-butoxymethylethoxy)-

CAS 35884-42-5 · C₁₀H₂₂O₃ · MW 190.28 g/mol

À propos de Dipropylene glycol mono propyl ether

Dipropylene glycol mono propyl ether est un composé chimique enregistré sous le numéro CAS 35884-42-5, de formule brute C₁₀H₂₂O₃, et de masse molaire 190.28 g/mol.

La molécule contient 35 atomes reliés par 34 liaisons chimiques. Le nom systématique IUPAC complet de ce composé est 1-(3-butoxypropoxy)propan-1-ol. Le modèle 3D interactif ci-dessus permet de visualiser l'arrangement spatial des atomes — vous pouvez le faire pivoter à la souris, zoomer avec la molette et basculer entre les modes de visualisation squelette / Ball & Stick / Space Fill.

Du point de vue des propriétés physico-chimiques, le coefficient de partage logP = 1.9 (valeur positive, composé lipophile), surface polaire PSA = 38.7 Å², 1 donneurs et 3 accepteurs de liaisons hydrogène. Ces paramètres sont essentiels pour évaluer la biodisponibilité et l'interaction avec les biomolécules.

Les données chimiques de ce composé proviennent de PubChem (NIH NLM NCBI), l'une des plus grandes bases de données chimiques au monde. Toutes les informations sont mises à jour automatiquement et enrichies de traductions des mentions de danger GHS conformes au règlement CLP (CE 1272/2008). Le widget ci-dessus peut être utilisé à des fins éducatives, de recherche et commerciales.

Propriétés physico-chimiques

Wzór sumaryczny	C₁₀H₂₂O₃
Masa molowa	190.28 g/mol
IUPAC	1-(3-butoxypropoxy)propan-1-ol
SMILES	`CCCCOCCCOC(CC)O`
InChIKey	`LNFLHXZJCVGTSO-UHFFFAOYSA-N`
logP (XLogP3)	1.9
PSA	38.7 Å²
HBD / HBA	1 / 3
PubChem CID	CID 3015813 ↗

Littérature scientifique

Literatura naukowa

20 artykułów · 16 open access · Źródła: PubMed, OpenAlex, Semantic Scholar

📈 Timeline publikacji (20 artykułów)

Wysokość słupka = liczba artykułów w roku. Hover dla szczegółów.

Ultrasonic and viscometric study of molecular interactions in binary mixtures of aniline with 1-propanol, 2-propanol, 2-methyl-1-propanol, and 2-methyl-2-propanol at different temperatures

Anil Kumar Nain (2007) · Fluid Phase Equilibria

Cytowania: 83$ PaywallDOI ↗

Densities and Volumetric Properties of Binary Mixtures of Aniline with 1-Propanol, 2-Propanol, 2-Methyl-1-Propanol, and 2-Methyl-2-Propanol at Temperatures from 293.15 to 318.15 K

Anil Kumar Nain (2007) · International Journal of Thermophysics

Cytowania: 42$ PaywallDOI ↗

🔓

Dehydrochlorination of 2-chloroethanol, 2-chloro-1-propanol, 1-chloro-2-propanol, 2-chloro-2-methyl-1-propanol and 1-chloro-2-methyl-2-propanol

Kalevi Pihlaja, Marja-Leena Kiuru, Anne Sippola (2012) · Arkivoc

Cytowania: 2Open AccessDOI ↗PDF ↗

Vapor-Liquid Equilibria at 760 Mm. Pressure. 2-Propanol-Methanol, 2-Propanol-Ethyl Alcohol, 2-Propanol-Propanol, and 2-Propanol-2-Butyl Alcohol Systems.

Louis H. Ballard, M. Van Winkle (1952) · Industrial & Engineering Chemistry

Cytowania: 24$ PaywallDOI ↗

🔓

Development of a Non-Empirical Exchange-Hole Dipole Moment Dispersion Model

Alastair J. A. Price, Alberto Otero-de-la-Roza (2026) · arXiv (2609.21971v1)

Open AccessPDF ↗

🔓

Machine learning magnetic interactions from neutron powder diffraction data

Adit S. Desai, Yongqiang Cheng, Joseph A. M. Paddison (2026) · arXiv (2609.21970v1)

Open AccessPDF ↗

🔓

Low resistance NiO/β-Ga_{2}O_{3} heterojunction diodes grown via molecular beam epitaxy

Dagny Sacksteder, Anna Sacchi, Renae Gannon et al. (2026) · arXiv (2609.21901v1)

Open AccessPDF ↗

🔓

Adsorption of Phosgene Gas on Pristine and Noble Metal-Doped B12N12 Nanocages: Insights from Density Functional Theory

Shahariar Chowdhury, Mohammad Abdul Matin, Samiran Bhattacharjee et al. (2026) · arXiv (2609.21678v1)

Open AccessPDF ↗

🔓

Material chemical compositon impacts on the band alignments: Preliminary results on the 3D/2D perovskite interfaces

Philippe Baranek (2026) · arXiv (2609.21654v1)

Open AccessPDF ↗

🔓

Orbital angular momentum accumulation in SrVO3 thin films

Julien Brehin, Montserrat X. Aguilar-Pujol, Dongwook Go et al. (2026) · arXiv (2609.21551v1)

Open AccessPDF ↗

🔓

Single Best Fits Can Be Misleading: Resolving Common Trapping Signatures across FA--Cs Perovskites

Maxim Simmonds, Katarzyna Pydzińska-Białek, Thomas C. Rossi et al. (2026) · arXiv (2609.21545v1)

Open AccessPDF ↗

🔓

From sparse quantum-computing data to atomistic simulation with universal machine-learning interatomic potentials

Tuan Minh Do, Yuichiro Yoshida, Kenji Ishihara et al. (2026) · arXiv (2609.21536v1)

Open AccessPDF ↗

🔓

Granular thermostat implementation within the soft-sphere Discrete Element Method (DEM) framework, considerations and limitations

Marco Previtali, Herbert Eric Huppert, Sergio Andres Galindo Torres (2026) · arXiv (2609.21297v1)

Open AccessPDF ↗

🔓

Dual-Sublattice Ferromagnetism Driven by Cooperative Double Exchange and Superexchange at NdNiO$_3$/CaMnO$_3$ Interfaces

Sharup Sheikh, Uditha M. Jayathilake, Michael Terilli et al. (2026) · arXiv (2609.21002v1)

Open AccessPDF ↗

🔓

Spacetime Dynamics of Altermagnetic Magnons

Ali Emami Kopaei, Karthik Subramaniam Eswaran, Krzysztof Wohlfeld (2026) · arXiv (2609.20767v1)

Open AccessPDF ↗

🔓

A Gaussian process coarse-grained potential for Na-montmorillonite

Yalda Pedram, Yaoting Zhang, Laurent Brochard et al. (2026) · arXiv (2609.20645v1)

Open AccessPDF ↗

🔓

Collective Ion Dynamics from Finite-Volume Fluctuations in Model Explicit-Solvent Electrolytes

Jeongmin Kim (2026) · arXiv (2609.20503v1)

Open AccessPDF ↗

🔓

Disorder-induced modulation of the nonlinear Hall effect in Weyl semimetals

Juan A. Cañas, Daniel A. Bonilla, A. Martín-Ruiz (2026) · arXiv (2609.20471v1)

Open AccessPDF ↗

🔓

A Computational Method to Simulate Electrostatic Actuation in Polycatenated Architected Materials

Mateus Maciel Vivaldi, Alexandre F. Fonseca (2026) · arXiv (2609.20373v1)

Open AccessPDF ↗

Excess Molar Volumes of Binary Liquid Mixtures of 1-Propanol and of 2-Propanol + Propane-1,2-diol, 1-Methoxy-2-propanol, 1-Ethoxy-2-propanol, and 1-<i>tert</i>-Butoxy-2-propanol and Water + 1-Methoxy-2-propanol and 1-Ethoxy-2-propanol at 298.15 K

Amalendu Pal, Sanjay Sharma, Yoginder P. Singh (1997) · Journal of Chemical & Engineering Data

Cytowania: 20$ PaywallDOI ↗

Dane z PubMed (NIH NLM), OpenAlex (CC0), Semantic Scholar (AI2). AI Summary wygenerowane przez Semantic Scholar TLDR. Artykuły z ikoną wymagają płatnego dostępu.

Synonymes

Propanol, 1(or 2)-(2-butoxymethylethoxy)- · RefChem:869560 · 1-(3-butoxypropoxy)propan-1-ol · 35884-42-5 · SCHEMBL2443181 · LNFLHXZJCVGTSO-UHFFFAOYSA-N · 958819-30-2 · NS00019393

Sources des données

📊 PubChem CID 3015813 — NIH
🔬 NIST WebBook — spektroskopia
🌐 Wikidata
💊 ChEMBL — bioaktywność

Acheter en boutique

Dipropylene glycol mono propyl ether →

Molécules apparentées

Sodium bicarbonate CAS 144-55-8 · CHNaO3 Salicylic acid CAS 69-72-7 · C7H6O3 L-Threonine CAS 72-19-5 · C4H9NO3 Diethylene glycol monobutyl ether CAS 112-34-5 · C8H18O3 Sodium citrate CAS 68-04-2 · C₆H₅Na₃O₇ Methyl methacrylate (MMA) CAS 80-62-6 · C5H8O2