Does BMA mean n-butyl methacrylate or isobutyl methacrylate?

In most commercial usage the bare abbreviation means the normal isomer, n-butyl methacrylate, CAS 97-88-1. The branched isomer, isobutyl methacrylate, is a different substance with its own identifiers and a different contribution to copolymer hardness, and the tertiary isomer is different again. Because all three are abbreviated loosely in day-to-day correspondence, an order written as BMA alone is ambiguous. Write the full chemical name and the CAS number on every enquiry, purchase order and goods-inwards record.

Why must the monomer not be blanketed with pure nitrogen?

Because the stabiliser used in commercial methacrylate monomers requires dissolved oxygen to function. It intercepts radicals by a mechanism that consumes oxygen, so a drum stripped of oxygen contains an inhibitor that is chemically present and functionally absent. The correct headspace is air, or air diluted with nitrogen to a specified oxygen content, never an inert blanket. This is one of the very few cases in a chemical store where displacing oxygen makes a material more dangerous rather than less, and it catches people whose instinct is trained on flammable solvents.

How should inhibitor content be read on a certificate?

As a starting condition rather than a permanent property. The certificate reports the inhibitor level at release; that level falls in storage as the stabiliser does its job, and it falls faster in warm conditions, in light and in the presence of contamination. A long-stored drum can meet its original certificate on every other line while having very little inhibitor left. Where storage has been long or uncertain, retest the inhibitor level before charging a reactor rather than relying on the release figure.

What is popcorn polymerisation and why does it matter here?

It is a self-propagating, expanding polymer growth that forms in dead legs, vapour spaces, valve bonnets and residues where inhibitor cannot reach. Once seeded it continues under conditions that would not start a normal polymerisation, and it grows mechanically enough to jam valves and distort equipment. The controls are housekeeping controls: no unswept dead legs, no long-standing residues, no lines left full between campaigns, and clean vessels before refilling. It is not a reason to avoid methacrylate monomers, but it is a reason to design the pipework as if the monomer were reactive, because it is.

How does the butyl ester change a copolymer compared with the methyl one?

The four-carbon ester side chain is flexible and bulky, so it loosens chain packing and lowers the temperature at which the polymer softens. Against the methyl ester it gives a softer, more flexible and more extensible polymer, better adhesion and easier film formation, at the cost of hardness and block resistance. Against the corresponding acrylate it gives a harder polymer with the weathering advantage of the methacrylate backbone. Formulators use it as the soft component of an all-methacrylate system, which keeps the durability while tuning flexibility.

Was ist Dipropylene glycol dimethyl ether?

Dipropylene glycol dimethyl ether ist eine chemische Verbindung, registriert unter der CAS-Nummer 111109-77-4. Summenformel: C8H18O3. Molmasse: 162.23 g/mol. IUPAC: 1-methoxy-3-(3-methoxypropoxy)propane.

Wie lautet die CAS-Nummer von Dipropylene glycol dimethyl ether?

Die CAS-Nummer von Dipropylene glycol dimethyl ether ist 111109-77-4 — eine eindeutige Kennung des Chemical Abstracts Service (CAS).

Wie lautet die Summenformel von Dipropylene glycol dimethyl ether?

Summenformel: C8H18O3. Molmasse: 162.23 g/mol. logP (XLogP3): 0.5. PSA: 27.7 Å².

Wo kann ich Dipropylene glycol dimethyl ether kaufen?

Dipropylene glycol dimethyl ether ist in unserem Shop erhältlich. Produkt ansehen: https://epchems.online/products/dipropylene-glycol-dimethyl-ether/

Woher stammen die chemischen Daten für Dipropylene glycol dimethyl ether?

Die chemischen Daten für Dipropylene glycol dimethyl ether stammen aus zuverlässigen Quellen: PubChem (NIH). PubChem CID: 86302. Konform mit der CLP-Verordnung (EG 1272/2008), verfügbar unter der Lizenz CC-BY 4.0.

Dipropylene glycol dimethyl ether

1-Methoxy-3-(3-methoxypropoxy)propane

CAS 111109-77-4 · C₈H₁₈O₃ · MW 162.23 g/mol

Über Dipropylene glycol dimethyl ether

Dipropylene glycol dimethyl ether ist eine chemische Verbindung, registriert unter der Nummer CAS 111109-77-4, mit der Summenformel C₈H₁₈O₃, und einer Molmasse von 162.23 g/mol.

Das Molekül enthält 29 Atome, verbunden durch 28 chemische Bindungen. Der vollständige systematische IUPAC-Name dieser Verbindung lautet 1-methoxy-3-(3-methoxypropoxy)propane. Das interaktive 3D-Modell oben zeigt die räumliche Anordnung der Atome — Sie können es mit der Maus drehen, mit dem Scrollrad zoomen und zwischen den Darstellungsmodi Skelett / Ball & Stick / Space Fill wechseln.

Hinsichtlich der physikalisch-chemischen Eigenschaften der Verteilungskoeffizient logP = 0.5 (positiver Wert, lipophile Verbindung), polare Oberfläche PSA = 27.7 Å², 0 Donatoren und 3 Wasserstoffbrücken-Akzeptoren. Diese Parameter sind entscheidend für die Beurteilung der Bioverfügbarkeit und der Wechselwirkung mit Biomolekülen.

Die chemischen Daten für diese Verbindung stammen aus PubChem (NIH NLM NCBI), einer der größten chemischen Datenbanken der Welt. Alle Informationen werden automatisch aktualisiert und um GHS-Gefahrenhinweise gemäß der CLP-Verordnung (EG 1272/2008) ergänzt. Das obige Widget darf für Bildungs-, Forschungs- und kommerzielle Zwecke verwendet werden.

Physikalisch-chemische Eigenschaften

Wzór sumaryczny	C₈H₁₈O₃
Masa molowa	162.23 g/mol
IUPAC	1-methoxy-3-(3-methoxypropoxy)propane
SMILES	`COCCCOCCCOC`
InChIKey	`KWDCKLXGUZOEGM-UHFFFAOYSA-N`
logP (XLogP3)	0.5
PSA	27.7 Å²
HBD / HBA	0 / 3
PubChem CID	CID 86302 ↗

GHS-Sicherheit

Sygnał: Uwaga

GHS07

Wissenschaftliche Literatur

Literatura naukowa

7 artykułów · 0 open access · Źródła: PubMed, OpenAlex, Semantic Scholar

📈 Timeline publikacji (7 artykułów)

Wysokość słupka = liczba artykułów w roku. Hover dla szczegółów.

Synthesis of enantiopure (R)-2-(4-methoxy-3-(3-methoxypropoxy)-benzyl)-3-methylbutanoic acid—a key intermediate for the preparation of Aliskiren

Natalia Andrushko, Vasyl Andrushko, Thomas Thyrann et al. (2008) · Tetrahedron Letters

Cytowania: 11$ PaywallDOI ↗

RENIN IN COMPLEXED WITH N-({(3S,4S)-4-[(benzylsulfonyl)amino]pyrrolidin-3-yl}methyl)-4-methoxy-3-(3-methoxypropoxy)-N-(propan-2-yl)benzamide INHIBITOR

N. Ostermann (2015)

$ PaywallDOI ↗

StructureActivity Relationships and Discovery of (S)6-Isopropyl-2-methoxy-3-(3-methoxypropoxy)-10-oxo-5,10-dihydro6Hpyrido[1,2h][1,7]naphthyridine-9-carboxylic Acid (AB-452), a Novel Orally Available HBV RNA Destabilizer

$ PaywallDOI ↗

RENIN IN COMPLEXED WITH (3S,4S)-4-({[4-methoxy-3-(3-methoxypropoxy)benzoyl](propan-2-yl)amino}methyl)pyrrolidin-3-yl benzylcarbamate INHIBITOR

N. Ostermann (2014) · Worldwide Protein Data Bank

$ PaywallDOI ↗

RENIN IN COMPLEXED WITH 4-methoxy-3-(3-methoxypropoxy)-N-{[(3S,4S)-4-{[(4-methylphenyl)sulfonyl]amino}pyrrolidin-3-yl]methyl}-N-(propan-2-yl)benzamide INHIBITOR

N. Ostermann (2014) · Worldwide Protein Data Bank

$ PaywallDOI ↗

Caffeine, 8‐(3‐(Hydroxymercuri)‐2‐Methoxypropoxy)‐ 5743‐18‐0

(2012) · Sax's Dangerous Properties of Industrial Materials

$ PaywallDOI ↗

Dane z PubMed (NIH NLM), OpenAlex (CC0), Semantic Scholar (AI2). AI Summary wygenerowane przez Semantic Scholar TLDR. Artykuły z ikoną wymagają płatnego dostępu.

Datenquellen

📊 PubChem CID 86302 — NIH
🔬 NIST WebBook — spektroskopia
🌐 Wikidata
💊 ChEMBL — bioaktywność

Im Shop kaufen

Dipropylene glycol dimethyl ether →

Verwandte Moleküle

1-Propanol (n-Propanol) CAS 71-23-8 · C3H8O Propylene glycol monomethyl ether (PM) CAS 107-98-2 · C4H10O2 1,2-Propylene Diacetate (PGDA) CAS 623-84-7 · C7H12O4 Ethyl Methyl Carbonate CAS 623-53-0 · C4H8O3 Phthalic anhydride (MA) CAS 85-44-9 · C8H4O3 Sodium citrate CAS 68-04-2 · C₆H₅Na₃O₇