Does BMA mean n-butyl methacrylate or isobutyl methacrylate?

In most commercial usage the bare abbreviation means the normal isomer, n-butyl methacrylate, CAS 97-88-1. The branched isomer, isobutyl methacrylate, is a different substance with its own identifiers and a different contribution to copolymer hardness, and the tertiary isomer is different again. Because all three are abbreviated loosely in day-to-day correspondence, an order written as BMA alone is ambiguous. Write the full chemical name and the CAS number on every enquiry, purchase order and goods-inwards record.

Why must the monomer not be blanketed with pure nitrogen?

Because the stabiliser used in commercial methacrylate monomers requires dissolved oxygen to function. It intercepts radicals by a mechanism that consumes oxygen, so a drum stripped of oxygen contains an inhibitor that is chemically present and functionally absent. The correct headspace is air, or air diluted with nitrogen to a specified oxygen content, never an inert blanket. This is one of the very few cases in a chemical store where displacing oxygen makes a material more dangerous rather than less, and it catches people whose instinct is trained on flammable solvents.

How should inhibitor content be read on a certificate?

As a starting condition rather than a permanent property. The certificate reports the inhibitor level at release; that level falls in storage as the stabiliser does its job, and it falls faster in warm conditions, in light and in the presence of contamination. A long-stored drum can meet its original certificate on every other line while having very little inhibitor left. Where storage has been long or uncertain, retest the inhibitor level before charging a reactor rather than relying on the release figure.

What is popcorn polymerisation and why does it matter here?

It is a self-propagating, expanding polymer growth that forms in dead legs, vapour spaces, valve bonnets and residues where inhibitor cannot reach. Once seeded it continues under conditions that would not start a normal polymerisation, and it grows mechanically enough to jam valves and distort equipment. The controls are housekeeping controls: no unswept dead legs, no long-standing residues, no lines left full between campaigns, and clean vessels before refilling. It is not a reason to avoid methacrylate monomers, but it is a reason to design the pipework as if the monomer were reactive, because it is.

How does the butyl ester change a copolymer compared with the methyl one?

The four-carbon ester side chain is flexible and bulky, so it loosens chain packing and lowers the temperature at which the polymer softens. Against the methyl ester it gives a softer, more flexible and more extensible polymer, better adhesion and easier film formation, at the cost of hardness and block resistance. Against the corresponding acrylate it gives a harder polymer with the weathering advantage of the methacrylate backbone. Formulators use it as the soft component of an all-methacrylate system, which keeps the durability while tuning flexibility.

Qu'est-ce que Propylene glycol monomethyl ether acetate (PMA) ?

Propylene glycol monomethyl ether acetate (PMA) est un composé chimique enregistré sous le numéro CAS 108-65-6. Formule brute: C6H12O3. Masse molaire: 132.16 g/mol. IUPAC: 1-methoxypropan-2-yl acetate.

Quel est le numéro CAS de Propylene glycol monomethyl ether acetate (PMA) ?

Le numéro CAS de Propylene glycol monomethyl ether acetate (PMA) est 108-65-6 — un identifiant unique du Chemical Abstracts Service (CAS).

Quelle est la formule brute de Propylene glycol monomethyl ether acetate (PMA) ?

Formule brute: C6H12O3. Masse molaire: 132.16 g/mol. logP (XLogP3): 0.4. PSA: 35.5 Å².

Quels sont les dangers GHS de Propylene glycol monomethyl ether acetate (PMA) ?

Selon la classification GHS, Propylene glycol monomethyl ether acetate (PMA) doit porter les mentions de danger suivantes : H226 (Liquide et vapeurs inflammables.).

Où acheter Propylene glycol monomethyl ether acetate (PMA) ?

Propylene glycol monomethyl ether acetate (PMA) est disponible dans notre boutique. Voir le produit : https://epchems.online/products/propylene-glycol-monomethyl-ether-acetate-pma/

D'où proviennent les données chimiques de Propylene glycol monomethyl ether acetate (PMA) ?

Les données chimiques de Propylene glycol monomethyl ether acetate (PMA) proviennent de sources faisant autorité : PubChem (NIH), ChEMBL (EBI). PubChem CID: 7946. Conformes au règlement CLP (CE 1272/2008), disponibles sous licence CC-BY 4.0.

Propylene glycol monomethyl ether acetate (PMA)

Propylene glycol methyl ether acetate

CAS 108-65-6 · C₆H₁₂O₃ · MW 132.16 g/mol

À propos de Propylene glycol monomethyl ether acetate (PMA)

Propylene glycol monomethyl ether acetate (PMA) est un composé chimique enregistré sous le numéro CAS 108-65-6, de formule brute C₆H₁₂O₃, et de masse molaire 132.16 g/mol.

La molécule contient 21 atomes reliés par 20 liaisons chimiques. Le nom systématique IUPAC complet de ce composé est 1-methoxypropan-2-yl acetate. Le modèle 3D interactif ci-dessus permet de visualiser l'arrangement spatial des atomes — vous pouvez le faire pivoter à la souris, zoomer avec la molette et basculer entre les modes de visualisation squelette / Ball & Stick / Space Fill.

Du point de vue des propriétés physico-chimiques, le coefficient de partage logP = 0.4 (valeur positive, composé lipophile), surface polaire PSA = 35.5 Å², 0 donneurs et 3 accepteurs de liaisons hydrogène. Ces paramètres sont essentiels pour évaluer la biodisponibilité et l'interaction avec les biomolécules.

Les données chimiques de ce composé proviennent de PubChem (NIH NLM NCBI), l'une des plus grandes bases de données chimiques au monde. Toutes les informations sont mises à jour automatiquement et enrichies de traductions des mentions de danger GHS conformes au règlement CLP (CE 1272/2008). Le widget ci-dessus peut être utilisé à des fins éducatives, de recherche et commerciales.

Propriétés physico-chimiques

Wzór sumaryczny	C₆H₁₂O₃
Masa molowa	132.16 g/mol
IUPAC	1-methoxypropan-2-yl acetate
SMILES	`CC(COC)OC(=O)C`
InChIKey	`LLHKCFNBLRBOGN-UHFFFAOYSA-N`
logP (XLogP3)	0.4
PSA	35.5 Å²
HBD / HBA	0 / 3
PubChem CID	CID 7946 ↗

Sécurité GHS

Sygnał: Uwaga

GHS02

H226 — Łatwopalna ciecz i pary

Littérature scientifique

Literatura naukowa

9 artykułów · 1 open access · Źródła: PubMed, OpenAlex, Semantic Scholar

📈 Timeline publikacji (9 artykułów)

Wysokość słupka = liczba artykułów w roku. Hover dla szczegółów.

Experimental P ρ T Study of 1-Methoxypropan-2-yl Acetate and 2-(2-Ethoxyethoxy)ethyl Acetate at High Temperatures, Pressures, and Speed of Sound and Refractive Index at Ambient Pressure and P ρ T Modeling with Various Tammann–Tait-like PC-SAFT and SAFT Equations and Predictions of Some Thermodynamic Properties

Fatemeh Zarei, Masoumeh Najafi, Hosseinali Zarei (2026) · Journal of Chemical & Engineering Data

$ PaywallDOI ↗

🔓

The synthesis of (5-hydroxy-5-(1-methoxypropan-2-yl) -4-methylfuran-2(5h)-one, 5-(1-methoxypropan-2-yl) -4-methylfuran-2(5h)-one) and biological activity

N Gherraf, N Tamma (2015) · Journal of Fundamental and Applied Sciences

Open AccessDOI ↗PDF ↗

1‐(2‐NITROIMIDAZOL‐1‐YL)‐3‐METHOXYPROPAN‐2‐OL 13551‐87‐6

(2012) · Sax's Dangerous Properties of Industrial Materials

$ PaywallDOI ↗

Crystal structure of BRD4 bromodomain 1 (BD1) in complex with N2-(1,2,3-benzotriazol-5-yl)-N3-(dimethylsulfamoyl)-N6-[(2S)-1-methoxypropan-2-yl]pyridine-2,3,6-triamine

T.H. Park, B.I. Lee (2021) · Worldwide Protein Data Bank

$ PaywallDOI ↗

CRYSTAL STRUCTURE OF GLUCOKINASE (HEXOKINASE 4) COMPLEXED WITH LIGAND DIETHYL ({2-[3-(4-METHANESULFONYLPHENO XY)-5-{[(2S)-1-METHOXYPROPAN-2-YL]OXY}BENZAMIDO]-1,3-THIAZ OL-4-YL}METHYL)PHOSPHONATE

J.K. Muckelbauer (2021) · Worldwide Protein Data Bank

$ PaywallDOI ↗

3-(2-methoxypropan-2-yl)-1H-indole

Zhong, Sabilla (2014) · chemotion.net

$ PaywallDOI ↗

Synthesis of 3-(6-aryl-pyridin-2-yl)- and 8-(6-aryl-pyridin-2-yl) coumarins

Brahmbhatt, D I, Patel, M A, Gajera, J M et al. (2007) · CSIR

$ Paywall

Synthesis of some new 3-(6-arylpyridin-2-yl)- and 8-(6-arylpyridin-2-yl)coumarins

Brahmbhatt, D I, Pandya, Urvish R (2001) · NISCAIR-CSIR, India

$ Paywall

Isobaric vapor–liquid equilibria of the binary mixtures propylene glycol methyl ether+propylene glycol methyl ether acetate, methyl acetate+propylene glycol methyl ether and methanol+propylene glycol methyl ether acetate at 101.3kPa.

(2014)

$ PaywallDOI ↗PDF ↗

Dane z PubMed (NIH NLM), OpenAlex (CC0), Semantic Scholar (AI2). AI Summary wygenerowane przez Semantic Scholar TLDR. Artykuły z ikoną wymagają płatnego dostępu.

Synonymes

Propylene glycol methyl ether acetate · PGMEA cpd · RefChem:433493 · 1-Methoxy-2-propyl acetate · 108-65-6 · 1-methoxypropan-2-yl acetate · Propylene glycol monomethyl ether acetate · 2-Acetoxy-1-methoxypropane · 1-Methoxy-2-acetoxypropane · METHOXYISOPROPYL ACETATE · 2-Methoxy-1-methylethyl acetate · 2-Propanol, 1-methoxy-, acetate · 1-METHOXY-2-PROPANOL ACETATE · Propyleneglycol monomethyl ether acetate · NSC 2207

Sources des données

📊 PubChem CID 7946 — NIH
🔬 NIST WebBook — spektroskopia
💊 ChEMBL — bioaktywność

Acheter en boutique

Propylene glycol monomethyl ether acetate (PMA) →

Molécules apparentées

Acetone CAS 67-64-1 · C3H6O Triethylene Diamine CAS 280-57-9 · C6H12N2 Isopropyl alcohol CAS 67-63-0 · C3H8O Sodium Dodecyl Sulfonate (SDS) CAS 2386-53-0 · C12H25NaO3S Ethyl acetate CAS 141-78-6 · C4H8O2 Succinic Acid CAS 110-15-6 · C4H6O4