Technical articles
Application notes, material explainers and process guidance written around the chemicals we manufacture and export.
Propylene glycol ethyl ether in cleaning formulations
How a P-series glycol ether earns its place in a hard-surface cleaner: coupling, soil release, dry-down and the trade-offs behind each.
Glycerin supply: origin, refining and traceability
Where glycerin actually comes from, what each refining step removes, and which documents let a buyer trace a delivery back to its…
Light vs Dense Soda Ash: How to Choose
Same substance, two morphologies: how bulk density and particle size decide freight, dust, silo behaviour and the grade your process needs.
Salicylic acid as a raw material: grades and handling
How salicylic acid is graded, why crystal habit matters as much as assay, and which documents a regulated use will require.
Hexanediol: which one you are actually ordering
Three commercial diols answer to the name hexanediol. They are not interchangeable, and the identity check belongs before the enquiry.
n-Propanol in blends: azeotropes, water and recovery
The linear C3 alcohol earns its place in ink and coating blends. Water and azeotropes decide what it costs to keep using…
Choosing an industrial solvent: a selection method
A structured way to move from a process requirement to a named solvent grade, covering screening, plant fit, compliance and the cost…
PGEE in paint: film formation and defect diagnosis
What a glycol ether actually does between the spray gun and the dry film, and how to read the defects that say…
n-Propyl acetate: CAS, isomers, selection
Why "propyl acetate" is an ambiguous order, how n-propyl acetate (CAS 109-60-4) differs from its isomer, and where it sits on the…
Ester solvents: how to pick the right one
Acetates, carbonates, plasticisers and reactive monomers all sell as esters. A selection guide by job, not by family name.
Acetic ether and ethyl acetate: one substance, two names
A legacy trade name that says ether but means ester, the three substances it gets confused with, and how to settle it…
Diglyme: H360FD, peroxides, NMP swaps
Diglyme is a high-boiling aprotic ether with a harmonised H360FD classification and EUH019 peroxide risk — what buyers leaving NMP must know.
Methyl acetate: uses and what to specify
Methyl acetate (CAS 79-20-9): a fast ester solvent for coatings, inks and cleaning, and the usual replacement for acetone and MEK.
Triethylene glycol in gas dehydration: a field guide
Why TEG became the standard drying agent for natural gas, how the absorption and regeneration loop behaves, and what degrades it in…
Is triethylene glycol hazardous? TEG facts
Triethylene glycol has no EU harmonised classification. How TEG differs from ethylene and diethylene glycol, and what to specify when buying.
Diethylene glycol and the body: what the hazard really is
Why the label says only harmful if swallowed, what the body turns diethylene glycol into, and why the effect is delayed.
Propylene carbonate safety: what the data supports
A cyclic carbonate chosen to replace reprotoxic aprotic solvents. What its classification really says, and the alkaline hydrolysis trap.
What diethyl carbonate is actually bought for
Several unrelated buyers order the same ester for different reasons. The duty, not the data sheet, decides which grade you need.
Hydrochloric acid: materials, controls and paperwork
What the acid is used for, what it will destroy in your plant if the materials are wrong, and what a supplier…
SLES 70: specification, dilution and handling
Sodium lauryl ether sulfate at seventy percent active: what the certificate must state, how the gel phase behaves, and where the paste…
Glycol ethers in de-icing fluids
Propylene glycol ethyl ether is not the freezing-point depressant in an anti-freeze fluid. Here is what a glycol ether really contributes.
n-Butanol: solvent and feedstock
n-Butanol (CAS 71-36-3) is bought for two unrelated jobs: tail solvent in coatings and inks, and feedstock for butyl esters and glycol…
When documentation requirements change: a method
A change in what a dossier must contain is a project with a sequence. How to notice it, size it, and carry…
Goods-in testing of a solvent delivery, step by step
A delivered lot is unverified until your own laboratory says otherwise. Sampling, identity, the short panel and what to do on failure.
Isopropyl alcohol: routes, water content and grades
How the two production routes shape the impurity profile, why the water azeotrope sets the price ladder, and what to order.
PGEE and the environment: VOC, water, alternatives
A solvent that counts as VOC, mixes with water completely and resists gravity separation. Where its burden really falls, and what to…
Sugar alcohols: a raw material buyer’s orientation
Polyols arrive as syrups, crystals and granulates that behave very differently. A supply-side look at the family and its handling.
Is dimethyl carbonate toxic? A buyer-level answer
Dimethyl carbonate is a low-toxicity ester with a fire hazard and a methanol question. Here is what the paperwork has to prove,…
Dimethyl dicarbonate: where it is used, and why
Which beverages are treated with dimethyl dicarbonate, what it turns into, and the dosing, handling and documentation the material demands.
Which glycol ether: propylene or ethylene
How to pick a glycol ether: propylene versus ethylene series, chain length and evaporation, and three very different hazard regimes.
Sorbitol grades: a specification and buying guide
Sorbitol as a raw material: crystallising and non-crystallising syrups, powder grades, and the limits that matter on a certificate.
Sorbitol: regulatory status and the documentation pack
A raw-material supplier answers questions about sorbitol with identity, authorisation and lot documents, not with claims. Here is that file.
Buying glycerin for consumer products: origin and papers
Glycerol reaches the same monograph from vegetable, animal and synthetic routes. What origin changes, and which declarations buyers ask for.
Is glycerin safe? Grade, dose and adulteration
Glycerol itself is benign. The harm on record came from adulteration, grade mismatch and overheating, not from the molecule.
Second-sourcing propylene glycol ethyl ether
Choosing a solvent for a business is choosing suppliers, plural: how to qualify a second source, bridge it and keep the approval…
Glycerin: grades, purity limits and what to verify
Glycerin is harmless or lethal depending on one limit test. Which grade to order, what a certificate must prove, and where the…
Diethylene glycol: uses and the identity risk
Diethylene glycol (CAS 111-46-6): industrial uses, and the substitution risk that makes substance identity worth testing.
Propylene glycol: why the grade decides everything
One CAS number covers the propylene glycol that goes into de-icing fluid and the propylene glycol that goes into medicine. They are…
Propylene glycol safety: grade, status and evidence
The question cannot be answered by the molecule alone. Grade, authorised use and lot documentation are what the answer actually rests on.
Propylene glycol ethyl ether in skin care products
An industrial solvent judged by cosmetic rules: isomer control, the documents a formulator needs, and why the grade matters more than the…
- ‹ Previous
- 1
- 2
- 3
- 4
- Next ›